2

I need to replace the free hub shell that is on my wheel with one that will work with an 11-speed Dura-Ace cassette. The current one is for Campagnolo.

I don't want to take the whole wheel apart, I only want to remove the part that the cassette goes into.

enter image description here I took the bolt out.

enter image description here And I took the bearings out.

enter image description here Now what?

Improve this question
8
  • What's the make/model of your wheels / hub?
    – alex
    Jun 15, 2016 at 4:41
  • That's enough on some hubs but perhaps there's a nut on the other side that needs removing too.
    – Chris
    Jun 15, 2016 at 7:44
  • If it doesn't just pull off, there might be a large hex socket in the axle bore that needs undoing (probably 8mm or 10mm).
    – Will Vousden
    Jun 15, 2016 at 7:51
  • I'm guessing you're sure theres a replacement body thats compatible with Shimano for this hub, but just as a side note, you can interchange Shimano/SRAM/Campagnolo rear wheels for 11 speed in the other manufacturer's drivetrains and have something working: velonews.competitor.com/2013/09/bikes-and-tech/…
    – Batman
    Jun 15, 2016 at 18:53
  • @alex Here's a link to the specs of te wheel.. vi.raptor.ebaydesc.com/ws/…
    – davidcondrey
    Jun 16, 2016 at 5:48

1 Answer 1

Reset to default
1

On the hub side of the freehub, there should be a Allen headed bolt that you need to unscrew. Some are 8mm, others are 10mm and some are 11mm. 11mm is a hard to find Allen wrench, so hopefully it's 8 or 10mm.
Put the Allen wrench into the center the freehub and unscrew in the normal direction (CCW).

Improve this answer
3
  • @Suspended User Thanks for fixing my mistake. I use the two terms synonymously, but they are technically different.
    – Scott Lundberg
    Jun 15, 2016 at 17:30
  • I understood and assume most would as well, but wanted to ensure it's correctness for search. Thanks!
    – Deleted User
    Jun 15, 2016 at 17:33
  • Some unscrew on the opposite side to the freehub, in which case you need an extra long wrench.
    – Nic
    Jun 15, 2016 at 21:22

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.