3

I have recently bought an Italian bike that uses Regina valves and I need to replace one of the inner tubes. Since I don't live in Italy and can't find that kind of valve anywhere, I thought of using an inner tube with Presta valve instead since both are very similar.

Is there any reason why I should worry about replacing a Regina valve with Presta?

Improve this question
6
  • 2
    Wow, didn't know those even existed!
    – Batman
    Commented Jul 3, 2016 at 14:46
  • Well, from what little I read the Regina is kinda weird. The two questions would be whether the hole in the rim is appropriately sized, and whether there is something "odd" about the rim (around the hole) vs a standard one used for Presta. But people get away with using a Presta in place of a Schrader, even absent the bushings that should be used in that case, so I can't see a likely problem with the Regina hole, so long as it's large enough, but not as large as a Schrader.
    – Daniel R Hicks
    Commented Jul 3, 2016 at 14:47
  • The Presta valve fits, but it seems to be just a bit smaller than Regina (something around 0.1 mm since it can be moved more easily) and my main concern is that it will tear off.
    – RelaxedArcher
    Commented Jul 3, 2016 at 15:12
  • I wouldn't worry about 0.1 mm -- theres no way you could get a grommet or something to adapt in that small of a space.
    – Batman
    Commented Jul 3, 2016 at 15:29
  • 1
    Apply a layer of electrician's tape around the base of the stem. It will keep the valve from rattling. I do that anyway with most Presta stems since they all seem to be a bit thinner than the holes in the rims.
    – Carel
    Commented Jul 3, 2016 at 16:38

1 Answer 1

Reset to default
1

Reginas and Prestas are really close in size, they can easily be interchanged. If you do find that it rattles in the larger hole on mixed surfaces, you can always use the threaded Presta nut, just don't crank it down too much. The Regina valve also has a metal seat, so before using the Presta, I would get a bit of emery cloth and make sure that there are no burrs on the inside of the valve hole - Presta tubes have a double rubber seat, so they are more fragile.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.