2

We use a Croozer Kid For Two, and we love it. I replaced the tires recently, but badly: one twisted, making the wheel look like it was out-of-true -- to the extent people started stopping me to tell me my "wheel was buckled". The twist was easily fixed, but it got me thinking.

How would I true a rim from a two-wheeled trailer? My own jig assumes a through-axle, but the trailer uses cantilever axles.

Improve this question
5
  • I think you’d have to modify your wheel truing jig so that the cantilevered axle would work. A bike shop that handles wheelchairs would have one of these.
    – RoboKaren
    Feb 5, 2018 at 20:42
  • Note that trailer wheels don’t bear a lot of weight and so just doing it by eye would likely be fine.
    – RoboKaren
    Feb 5, 2018 at 20:43
  • 2
    I would skip using the truing stand and just true the wheel on the trailer. You can generally clamp a strip of something to the frame to act as an indicator, so you can more easily zero in on the worst spots. Dishing is harder, but there should no need to dish accurately in most cases.
    – Daniel R Hicks
    Feb 5, 2018 at 21:53
  • 1
    I use my thumb as a gauge, and spin the wheel on the trailer. It works well enough, and the trailer has no rim brakes so perfectly true is not needed.
    – Criggie ♦
    Feb 6, 2018 at 10:20
  • 1
    @DanielRHicks : I haven't the rep to vote, so have a virtual(?!) +1. Would you please make your comment an answer, so I can accept it?
    – Steve Almond
    Feb 6, 2018 at 23:43

1 Answer 1

Reset to default
7

I would skip using the truing stand and just true the wheel on the trailer. You can generally clamp a strip of something to the frame to act as an indicator (have it stick out and just brush the rim, kind of like a rim brake pad), so you can more easily zero in on the worst spots.

Dishing/centering is harder without a stand, but there should no need to dish/center a trailer wheel that accurately in most cases.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.