1

I have a 2003 Klein Attitude Comp, and I want to put a crankset I have on it. However, the crankset is square taper and the current bb is not. Does anyone know what size square taper bb can go in this model, if at all?

I found this picture on google search. Note that the 2003 model is candy apple red.

picture

Improve this question
3
  • I hope yours does not have that damage!
    – Argenti Apparatus
    Commented Apr 25, 2018 at 22:34
  • It does not, but it was equipped by the previous owner with a bunch of parts that don't fit right, I am finding. Now I get to do a rebuild. Joy! :)
    – Him
    Commented Apr 26, 2018 at 13:42
  • 1
    Now you get to learn lots about bike mechanics, and build you own custom bike :-)
    – Argenti Apparatus
    Commented Apr 26, 2018 at 13:43

1 Answer 1

Reset to default
4

I googled a few pics of the frame - looks like it has a standard 'English' threaded bottom bracket shell - 1.375" x 24 tpi. Cartridge square taper BBs are readily available for this shell.

You'll need to measure the width of the shell, it should be 68 or 73mm. You'll need a BB unit compatible with that width.

The tricky part is figuring out what axle length you need to get the chainline right for your bike with the crank you have. I don't have any direct experience for that but there are at least a few questions and answers on this site on that topic.

You'll also need to check the square taper type of the crank. I think the JIS type is the most common. More info here.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.