I've a tektro draco hydraulic brakes on my mtb and I would like to know if it is possible to mount a different brand rotor to use with my brakes?

3 Answers 3


The brand of brake doesn't matter. The only variables you should care about are:

  1. Rotor diameter. You should probably get the same size as the old one; for a different size, you'll need an adapter to reposition the brake calipers.

  2. The way the rotor attaches to the hub. Most of them are held on with 6 bolts, but a few use the "Centerlock" attachement which looks like this:

enter image description here

  • Could I use any adapters?, or do I need the ones that matches the calipers brand?. I would like to upgrade to 200mm and is hard to find those tektro draco adapters.
    – yeforriak
    Sep 30, 2012 at 8:24
  • You have to match the caliper brand. It's the fork/frame end of the adapter that is standardised, but the caliper mounts tend to be proprietary.
    – cmannett85
    Sep 30, 2012 at 18:59
  • @cmannett85: they're not standardized, but I think there's only a small number of variations. Sep 30, 2012 at 22:47
  • @yeforriak: I'm not sure. You should post a separate question, maybe someone will know. Before you do, measure the distance between the mounting bolt holes (you might need measuring calipers). Sep 30, 2012 at 22:51

As long as the bolt pattern is the same and the rotor is the same size, it should be fine.


This is a separate answer only because I can't vote or comment on other's answers yet.

Speaking directly to the original question... yes - it is possible. I have a winter set of wheels with a rotor by a different maker and it is a center lock mount vs. a six-bolt mount of my regular wheels. No problem at all and it is one of the main things I like about disk brakes. With rim brakes I would have to adjust the brakes each time I did the switch-a-roo unless both sets of wheels had exactly the same width. Since the winter wheels have studded tires I make the switch on clear/dry days in the winter as well.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.