I have several questions that arise from the fact that the current drivetrain on my old Peugeot road bike is pretty tough to ride when climbing up some steep hills: so I've got a 42/52 up front and 6 speeds (largest: 24) on the back.

So my first question: will changing the front to e.g. 39/52 setup make a noticable difference.

If so, can it be exchanged to e.g. some older/used crakset such as this Campa http://apro.bikemag.hu/files/4/2/listing_photo159024_555485241366650384.jpg

It has the same tapered square connection as the current one.

  • 4
    It may be efficacious to replace your freewheel as well. You could probably fit a 14-28 freewheel without having to replace your derailleur and freewheels are super cheap. A 42 t ring x 24 t cog would yield a low gear of 3.5 gain ratios; a 39 t x 24 t would yield a low of 3.3 gain ratios; a 39 t x 28 t would yield a low of 2.8 gain ratios...so on and so on.
    – WTHarper
    Jul 11, 2013 at 20:49
  • 3
    – WTHarper
    Jul 11, 2013 at 20:49
  • Is the rest of the drivetrain Campy also?
    – mikes
    Jul 11, 2013 at 20:55
  • great tips, and link, I'll look into these
    – whitezo
    Jul 11, 2013 at 21:54
  • the drivetrain is of various standard Peugeot parts I think: Atom freewheel, Sedis chain, not sure about the crankset
    – whitezo
    Jul 11, 2013 at 21:55

4 Answers 4


You asked: will changing the front to e.g. 39/52 setup make a noticable difference? My answer is an unequivocal 'yes'. If you can however, consider 34 or 36-tooth inner and 50T outer, if you can find chainrings that fit your spider. TA make a large range of chainrings, however new ones will probably cost more than the monetary value of your bike.


You will definitely notice the changes. I have found this online calculator to be the best of a kind: http://gear-calculator.com/

Just enter your gear combinations (for cogs use custom and drag 6 of them in rigth places) and wheel size. For cadence use values 60-120 (these are "comfortable" values for short periods, "normal" would be around 90) to see the speed you can get with each gear combo.

There is also an option to compare two configurations, use your current config as a reference


Usually easier to change rear cassette (or wheel) than the crank. If you are really cheap, a fleamarket wheel might be the ticket, just check tor trueness and tight spokes.


Gearing is a function of the ratio between the chain rings on the front and your cassette on the rear wheel. Check out WTHarper's link to Sheldon Brown's gear calculator.

FWIW, I have an old Motobecane with similar gearing. Trying bikes with a slightly different gear ratio didn't seem to make enough of a difference on extreme hills (like in San Francisco) to significantly improve my ride.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.