2

I have a leader doberman with a front disc brake that I want to install on the rear. I know that it hasn't a rear disc brake tab, but I have found an adaptor for the caliper (http://www.ebay.com/itm/Bike-Disc-brake-bracket-frame-adaptor-3-sizes-for-140-160-180mm-rotor-free-gift-/271571281671?pt=Cycling_Parts_Accessories&var=&hash=item3f3ae8e707)

enter image description here

Now I don't know how to mount the rotor, but I have found something to mount it (http://www.ebay.com/itm/E-bike-double-hub-nut-ISO-44mm-thread-Disc-brake-rotor-adaptor-mount-left-Alum-/281474670783?pt=US_Chainrings_BMX_Sprockets&hash=item418932a0bf).

enter image description here

But is this compatible with my rear hub? What can I do? Only to stich it with glue or there is a solution?

  1. I have the classic Shimano gear levers. Will I have to change the shifters to install hydro disc brakes?
  • 1
    That adapter is for a double hub, it threads on just like a freewheel on the non-drive side. – ShemSeger Nov 19 '14 at 2:33
4

Why do you want to install rear discs? Keep in mind a decent set of disc brakes costs as much as this entire bike. The cost of making any improvements to this model bike is almost certainly not worth it.

Best advise I can give is just do not go there. It results in an expensive, unreliable and often dangerous solution to a problem that does not exist in a majority of cases. If you want a better bike, sell it and buy a better bike.

Even if you can put an adapter on to the frame, it affects wheel removal and makes all maintenance task twice as hard. You need a new hub - which practically means a new rear wheel. You won't be able to buy a rear wheel for less than the bike is worth second hand.

90% (100% if you read Sheldon Brown) of your braking comes from your front brake. A good V Brake will brake as effectively as a low end disc brake in 90% of conditions, and on the rear wheel, won't make a significant difference in the other 10% of conditions.

  • 2
    From someone that had a Leader road bike long ago (and actually liked it!) converting an inexpensive bike to disc is almost never cost effective. Unless the frame/bike is a hand me down from a deceased loved one, it just isn't worth the effort. – Deleted User Nov 18 '14 at 22:43

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.