I am looking to upgrade the stock wheels on my canondale caad10 rival. It came with a Fulcrum racing set. I was interested in converting this set of wheels for use on my single speed - a surly steamroller with an eno freewheel.
I have seen several options including rebuilding the rear wheel to thread on a single speed hub or just adapting the current hub through spacers to achieve a proper chainline.
I'm searching for a safe, but reliable and cheap conversion. Would anyone have any tips or suggestions for going forward?
[UPADATE] Just to bring some closure, and thanks, I used the front wheel as-is and ended up having a rear wheel built at my LBS. Went in to discuss options and found out they were running a $5 (yes, that's right) labor special. Parts + $5 and I was off and running, or pedaling. Thanks for the assistance, everyone!