1

I have some Dia Compe center pull brakes shown below. I was wondering what the best type of brake pads are to use for these brakes. Looking around at pictures on the internet, many people use standard road caliper pads, while others use old style pads rectangular block pads (as in the picture) to preserve the authenticity. I've also seen a few examples of people using v-brake pads. are there any advantages to using a specific type of pad on brakes like this? I really don't care about esthetics, and I'm really just looking for what will provide the best braking experience.

Dia Compe Brakes

  • Dia compe still makes centerpulls -- maybe the pads from those are good? I don't use centerpulls, so I'm not really sure. – Batman Feb 25 '15 at 18:07
  • Yeah, it looks like you can still get "vintage" pads. However, I'm wondering if anybody has tried something else and had any information on how other types of pad performed. Velo-Orange shows them with what looks like their basic road pads – Kibbee Feb 25 '15 at 20:52
  • 1
    Authenticity be damned - use the brake pads that work best for you. Brake pads are consumable wear items and will be replaced.periodically. Personally I always go koolstop. You could look for black-only variants, or even colour-in the non-friction surface with a black marker. – Criggie Oct 20 '17 at 4:15
3

You can use V-brake pads, but they tend to be longer and can create clearance issues. On the bike I currently have set up with those pads on Dia-Compe centerpulls, the shoes hit the fork when the brake is open, making wheel removal difficult.

edit:

As ojs notes below, road caliper pads are probably your best bet. They also tend to be on shorter posts, so they don't limit tire clearance as much as V-brake pads.

  • 1
    You could use standard road pads to fix that problem. – ojs Oct 20 '17 at 8:33
  • Welcome to the site! You might like to take our brief tour for more information on how the site works but you seem to be doing great so far. :-) – David Richerby Oct 21 '17 at 13:00
2

Back when those were The Brake, the pad to use was the Scott Mathauser pad. The compound was soft, reminiscent of a pink pencil eraser. While no longer made, there are several brands that offer similar compound: Yokozuna and Kool-Stop come to mind.

You will likely have to order pads to fit those calipers. It does appear as if Yokozuna actually still sells the blocks that are installed in the pair of Dia-Compe Gran Compe calipers that sit untouched since the late 80s in my parts bin. http://www.yokozunausa.com/screbl.html

That pad style is similar to Campagnolo, so if you have an LBS that stocks Campy stuff, you might be able to get something similar and install them.

1

Koolstop makes a bunch of different shoes and shoe assemblies. I'm pretty sure the Weinmann shoes will slip right into the shoe holders. Or you could replace the whole assembly with something else. Just about anything with a threaded post should fit those brakes.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.