0

so I accidentally screwed the wrong side pedal into my left hand crankarm on my Giant Defy 3 2014, and I have been looking to buy a replacement part myself and get a mechanic to install it.

I am wondering what would be compatible with the original Sora groupset components? I haven't been able to find just a crankarm, so I am looking to buy a crankset.

I can get a Shimano Sora Double 3550 9 Speed Chainset for 40GBP.

Would other 9 speed cranksets work?

What other left hand crankarms would be compatible?

Thanks.

  • 3
    I'd ask the LBS if they have spare Shimano road left crank arm. You can replace it yourself, the only things required are hex key and spoon (or plastic card). – Klaster_1 Mar 4 '15 at 12:57
  • Any Shimano left arm will be OK provided it's the correct length. The length of the dead one is stamped into the material. It could just be on the right arm. – Carel Mar 4 '15 at 18:52
  • 1
    I tried that once on an old MTB setup - the hole for the square taper was rotated 45 degrees on one crank set. – mattnz Mar 4 '15 at 19:09
1

If you're replacing the whole crankset and BB, then any 9-speed double crankset should work. The chain width for 9-speed systems is the same for all makes (not the case for 10 or 11 speed).

But before you do that, I'd look around and see if you can replace just the left arm. Any crank designed for the Shimano "outboard bearing" BB should work (those are the ones that clamp onto the BB spindle with two pinch bolts). Just make sure the crank arm is the same length.

0

You may well get a bargain like @Klaster_1 mentions in your comments.

If you did want to buy a new crank set that behaves exactly the same, you could get anything that matches the same specifications:

  1. Bolt Circle Diameter,
  2. the teeth count (in your case 34/50 if you're replacing that sora one)
  3. ensure that its got the right shape hole for the bottom bracket spindle (rarely incorrect)
  4. crank arm length

If you have a Sora groupset already then you may get a smoother experience from getting the same model crankset, but this is down to opinion, and I haven't had any issues with mixing.

As usual, your local bike shop will be able to give you plenty of information.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.