3

I've reset the pistons (after taking the pads out) of my XT hydraulic brakes, and made sure they do extract evenly when operating the lever. After putting the pads and the wheel back in (and adjusting the bracket mount to a symmetrical position over the rotor), the left piston extract much more than the other one, which was the reason i wanted to reset it in the first place.

Any ideas why?

  • Maybe the pin that holds the calipers needs to be lubricated ? When the pistons are pushing the pads, they slide back and forth on that pin. But be careful not to get any grease on the pads themselves. – Nik May 29 '15 at 18:10
1

If the pistons extract evenly without pads but uneven with pads, one of the pads is giving more resistance. Try to clean the whole inside of caliper and check the pads and how they fit inside..

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.