First time taking the cranks off. The bolts, chinrings and drive side came out easy. Left is stuck. Should I open, pull or do something particular for it to come out?

enter image description here

  • 3
    If the first one came off without a puller it was probably too loose. Jun 2 '15 at 16:02
  • Sounds like you're using the wrong sized hammer.
    – ShemSeger
    Jun 2 '15 at 20:36

You must use a Crank Arm Puller tool:

Park Tools Crank Arm Puller

Here's how to use it: Video


In addition to the answer provided by CQH, You could also get the crank off by putting the other crank back on (not very tightly), removing the bolt from the stuck crank, and riding a bit.

The crank should fall off after a little while, especially if you do bunnyhops and other things that put a lot of torque on the cranks.

This may not work with your octalink setup. I've only done it with square tapers.

This is a hack, and I wouldn't do it if you've got expensive cranks, but it's a good option if you don't have a crank puller.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.