I've been looking at a few tutorials on packing a bike to take it on a plane, and most of them make no mention of disc brakes. One did specifically mention disc brakes, and recommended taking the rotors off and sandwiching them between two small sheets of plywood to stop them getting bent or warped.

Any thoughts on this?

Can you just put them back on with the allen key bolts that attach them? Or do you need special alignment tools and a torque wrench?

  • How is the bike being packed as a whole? If it's in a hardshell case, for example, it likely doesn't matter. If it's in some bubble and plastic wrap, then it will matter a whole lot more.
    – Batman
    Jun 4, 2015 at 15:02
  • 1
    More important than removing the rotors is to place a dummy axle between the dropouts (assuming the wheel is removed). Also, unbolt the rear derailer and tape it loosely to the chain stay. Jun 4, 2015 at 18:54
  • 1
    Disc brakes are usually fitted with a T25 torx head. Additional to what Daniel is saying about and axle spacer you should also put a spacer between your brake pads in the calliper. Nothing worse than trying to force them open without the right tools.
    – DWGKNZ
    Jun 4, 2015 at 20:25
  • @DanielRHicks - I forgot a dummy axel once and they dropped the box and bent the dropouts on a carbon fork. Much teeth mashing ensued.
    – Rider_X
    Nov 10, 2015 at 23:28
  • I just received an ebike in a cardboard box, the front disc rotor was bent during the transport. So I see that I am not alone in this case.
    – zoobab
    Sep 3, 2020 at 11:13

6 Answers 6


I recommend removing the disc rotors when you travel with a bike regardless of the packaging method. I have a hard sided case and have done the cardboard box thing (my fat bike does not fit in my hard sided case). Hard sided cases rely on compression to keep everything in place; compression against the flat side of a rotor is not a good thing. Remove the rotors and pack them on each side of a piece of rigid material that will reinforce them and tape the whole thing up. They can be easily put back on with the proper Torx wrench.

If this seems like overkill, keep in mind TSA WILL unpack your bike. Do not bother closing a cardboard box before getting to the airport, because they will just cut it open. I leave the box open and leave a roll of tape on top for them to seal it with. I pack any loose items in the box with the understanding that they will be removed and likely reinserted in a different spot inside the box/case. That being the case, you want loose items padded or enclosed in something for when they end up someplace you didn't intend them.

I usually make sure to take all the same tools I used to disassemble the bike and pack them as well (usually in a separate padded bag) in the same box/container. I have always favored the center lock rotors because they were easier on and off for travel.

  • If you travel a lot and remove your rotor often you should be refreshing the Loctite and/or replacing the screws regularly.
    – DWGKNZ
    Jun 4, 2015 at 20:27
  • 1
    @DWGKNZ All I heard there was Center Lock is better ;D Jun 4, 2015 at 20:55
  • shimango fanboy by chance?
    – DWGKNZ
    Jun 4, 2015 at 21:55
  • 1
    My first hub set with centerlock were DT Swiss, but they were Shimano rotors.....It really is just a better attachment system, even pressure, less weight, same tools as hubs... Jun 4, 2015 at 21:58
  • 1
    There isn't an alignment process, there are torque recommendations which I personally have never paid attention to. I do recommend getting all the screws in loosely first, and then tightening them by jumping from screw to opposite side screw (so as to night tighten down one side of the rotor first. Jun 5, 2015 at 14:56

I have flown 6x with my bike (Cyclocross Disc) in a soft padded bike bag and never once had issues with the rotors. Numerous other MTB friends never remove the rotors either and have not had trouble when flying.

Echoing the comment by @Daniel, I'd be more focussed on the dropouts and RD and making sure those are supported.

You are way more at risk stripping / losing screws than bending a disc. The wheels will be double padded by the wheel bag and the bike bag.


A torque wrench is definitely recommended, but some people develop a "feel" for the correct torque. There is usually blue threadlocker compound on the screws. There are small, cheap simple "flexion" torque keys that do the job quite well. My MTB came with one, actually.

  • Do you know where to find the "flexion" torque keys? A link to them would be great.
    – dlu
    Nov 11, 2015 at 1:02
  • 1
    mine looks like this ebay-kleinanzeigen.de/s-anzeige/…
    – B00g
    Nov 11, 2015 at 23:26
  • Very cool, thanks. It looks like it is "variable torque" – like a bending beam torque wrench. Searching on "flexion" got me stuff on physiology…
    – dlu
    Nov 11, 2015 at 23:30
  • 1
    Topeak also makes something similar. Includes bits. These are cheap enough to lose. They're not accurate but they're light. amazon.com/Topeak-ComboTorq-Wrench-Bit-Set/dp/B00ACTKZA4/…
    – B00g
    Nov 11, 2015 at 23:34

A few years late, but I thought I'd share my two cents - I recently flew with my mountain bike in an EVOC bike bag, and my front rotor did actually get bent out of shape beyond repair (according the local bike shop). So, I would recommend always removing the rotors.

  • That's unfortunate. The Evoc bag is designed with leaving the rotors on in mind. I don't know how old your bag is, but they have added improved rotor protection on newer versions of the bag: ep1.pinkbike.org/p5pb14676250/p5pb14676250.jpg
    – Andy P
    Oct 15, 2019 at 8:42
  • My bag is a slightly older version, it has some light rotor protection in the form of a semi rigid piece of plastic, but it wasn't stiff enough to actually protect the rotor. The packing instructions even say to leave the rotor on, but clearly it wasn't quite perfect. The photo you linked looks definitely more sturdy, too bad I don't have that version. I'd say for soft bags, if they don't have truly rigid protection around the rotor then it's safer to just take the rotors off. Oct 15, 2019 at 22:10

Since posting this question I went on a tour for a few months which involved flying with my bike twice. Both times it was packed in a cardboard bike box from a bike shop.

It may have been unclear in my original question, but my question was specifically about the disc rotors, not how to pack a bike in general. When searching elsewhere I found there was lots of info about general bike packing, e.g. remove the rear derailleur wrap it in padding, use a dummy axle for the fork, etc, but I didn't find a lot of info on disc brakes.

Anyway, to be safe I removed the rotors, interleaved them with sheets of clean paper towel to avoid contamination (so three sheets total), then sandwiched them between two squares of press-board, which I then wrapped with duct tape. This may indeed be overkill but I'm sure it can't hurt. To keep the torx screws safe, I put them back in the holes they go in and screwed them in a few rotations. When I put the brakes back on I did not use any special alignment tool or torque wrench, I just used the torx driver on my multi-tool and put them in by hand.


The thing ive found an issue isn't the rotors but actually the headset/stem (especially an integrated one piece setup) being the issue. My friend has a Specialized Venge Vias (disc) and he obviously had to remove the headset to turn the bars to fit into the rigid bike case. Removing the bar/stem means that there's no spare cable/hose so he had to have the brakes bled then re cabled when he arrived there and the same when he got back as they dont like being taken apart. an expensive trip just to take a disc braked bike.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.