I need to remove the bottom bracket bearing cups from my 2010 Athena groupset. Do they both unscrew anti-clockwise, or is one side different (and which one)?

  • Unfortunately, there is not a single rule. If the bearings are standard "internal" bearings (everything fits inside the bottom bracket cylinder at the bottom of the frame), then the left side cup unscrews "normally". Depending on the whims of the manufacturer, though, the right side cup may be "backwards" or may not be (though most likely it is backwards). If you're lucky there is thread sticking out and you can test the thread (run your thumbnail through it as you "unscrew" your hand) to see which way it goes. When you get to fancy external bearings and the like, all bets are off. – Daniel R Hicks Sep 24 '15 at 23:47
  • I've come to understand that the issue is English v Italian threading, where English is more usual. – Duncan McGregor Sep 26 '15 at 8:42
  • I think it's also the case that some older English BBs are "normal" on both sides, relying on a lock ring to hold the one side in place. And I'd not be surprised to find some relatively new BSOs similarly threaded, relying on thread lock compound to prevent the cup from turning -- I vaguely recall that that's been done occasionally. – Daniel R Hicks Sep 26 '15 at 12:38

For English-threaded Ultra Torque, the right (chain) side cup unscrews clockwise, the left one anti-clockwise. For Italian, both unscrew anti-clockwise.

It's most likely that you have English. I don't know how you could tell for certain though without asking your bike maker, measuring the size, or seeing which way they actually unscrew.

For the reason why the English is 'correct' see the link in the comment below.

  • It all has to do with precession. – Daniel R Hicks Sep 25 '15 at 11:54
  • The question was: which BB does the bike have. Saying "it might have either" doesn't really help. – Móż Sep 27 '15 at 3:57
  • The question wasn't which BB does the bike have? The question was, given it is Athena, which way does it unscrew? As there are English and Italian Athena BB's, you need to establish which you have in order to answer the question. – Duncan McGregor Nov 12 '15 at 11:02

I used google: from the Campag website the Athena groupset has an Over-Torque BB (pdf) with a BSA thread. Further searching reveals that BSA is an english thread, which is the modern standard. So yes, the left hnd cup unscrews anticliockwise and the right hand one clockwise.

  • 1
    Campag also sell Ultra Torque bearing cups with an Italian thread though, and 2010 Athena was Ultra Torque. – Duncan McGregor Sep 28 '15 at 6:33
  • 2
    Reasons to hate Campag #999... – Móż Sep 28 '15 at 7:10

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.