I'd like to buy a repair stand, but I can never seem to convince myself to drop the $100 minimum it seems I'd need to spend. Has anybody had any success building a stand themselves, or is it worth it to just buy one?

  • I see many folding stands priced in the $50 range. Nov 20, 2013 at 1:00
  • 1
    Another solution is find a spare junk seat pole, and mount it upside down in a bench vice. Take out your normal seat and pole, flip the bike and drop it over the vice-pole. Another benefit is you can rotate the whole bike around this axis, but it needs a solid bench and spaec around it.
    – Criggie
    Sep 24, 2015 at 22:10
  • I just got a full-sized 4DOF repair stand from Lidl for exactly 30EUR. The same promotion was on 2 years ago and local cyclists, who purchased then, swear by the product. It even features magnetic small parts trey. Nq nq nq.
    – Vorac
    Apr 25, 2016 at 13:59

20 Answers 20


I can tell you from experience that your best option is to buy a repair stand.

I worked in a shop for a number of years and thought there was no way I could use a consumer grade stand when I left. I purchased park tool PRS-4W at cost before I left the shop and built my own stand from it. The consumer price is now $200 for that so that is obviously not dealing with your $ issue. And even if it did, I have since purchased and use a consumer grade stand with less features to maintain 4 bikes of different size frames for 5 years now and it was well worth the $ spent. It gets the job done. Bite the bullet, get the stand you'll be glad you did.

  • 5
    The only thing I would add is that it is worth the extra money to buy a nicer one that is easy to set up and take down. If it is a big pain, you won't ever want to get it out
    – Geoff
    Aug 27, 2010 at 23:08
  • 1
    I've gone the other way with the stand - I have a proper stand bolted to the floor of the garage. The bolts are removable so I can clear the area when I need to, but it's so useful that I rarely do.
    – Мסž
    May 11, 2011 at 5:15

As a number of other posts have pointed out, your best option is to get yourself a proper repair stand. They are not that expensive, and you will find that you and your friends all get good use out of it. But, if you are determined to do it on the cheap, here are a couple of techniques that worked for me before getting a workstand:

  • Turning the bike upside down - this is really simple and requires no additional purchase. You may want to look at putting some form of drop sheet down underneath the bike both to protect the saddle and handlebars, and to catch drips. This works well for pretty much any work on the wheels or transmission.
  • A bike storage rack or car rack - obviously these are already designed to hold a bike, and you may already have one to hand.
  • Suspending the bike with rope - If you have some overhead attachment points, this can work, however it is not going to provide an immovable mount for the bike - you will still need to hold the bike against the force of your tools when fastening and unfastening things. A trick to be aware of is to use two suspension points overhead and two on the bike (head tube and seat tube) otherwise the bike will spin in the air.
  • 3
    Turning a bike upside down doesn't work very well for many road bikes where the cables arc up several inches above the handlebars. Nov 20, 2013 at 0:58
  • 1
    @Daniel R Hicks you can put under the handles boxes that are few inches hieght
    – Alexander
    Nov 20, 2013 at 1:10
  • 1
    I have done the rope from the ceiling joist thing. It is way more difficult than it was worth. Never got any real height out of the bike, but it did stay upright for a little while. However, it might be a different story with the winch and pulley bike storage systems.
    – BPugh
    Nov 20, 2013 at 14:59
  • 2
    I hadn't thought about using the car's bike carrier rack as a work stand before - good ideal.
    – robartsd
    Sep 30, 2016 at 15:48
  • 1
    About turning upside down: It works most of the time, but if you are going to change the front suspension, its a real hassle without stand. Jun 11, 2017 at 22:18

A lot of bicycle repair shops I've been in have metal double hooks hanging on a rope or a light chain from the ceiling such as these:

alt text

One hook goes under your saddle and the other on your handlebars on either side of the steering support. If you attach them a bit farther apart on the ceiling than the distance between your saddle and handlebars it makes for a pretty stable "repair stand". You can get them for EUR 3.95 (here for example) or you could make something similar.

  • A system like this is very common in the Netherlands. I think I recall a bike stand as well in some shops but the hooks coming down (on a motorized pully system) are standard. I have a non standard bike (recumbent) and the hook system works for it, where a bike stand might not.
    – Willeke
    Dec 24, 2016 at 13:34

A storage stand can make a pretty good repair stand, anything that lets the wheels and pedals rotate. A car rack will also work well.

  • I used my car rack for quite awhile before getting a proper stand. Gotta be careful not to get gunk onto the paint, or to scratch stuff up with the pedals etc... Oct 21, 2010 at 20:46

Between the ability to turn the bike upside down and having a trainer that I can hook it to, I never found the need to buy a repair stand (and my current bike was assembled completely from components, so I had to do everything to it that one gets to do to a bike!). I see that a repair stand would save a bit of time, so I would get one if I was doing repair professionally. However, for the amateur, it seems like overkill.


There are a large number of sets of instructions for making your own DIY Bike Repair Stand over on Instructables, this page is the result of searching for Bike Repair Stand on their site. I keep meaning to try out one of these but I never seem to have the time to build one, some of the results look more practical than others, as ever YMMV.


I have a large workbench with a bench vise mounted on it. I made a jig from a couple pieces of wood to hold the bike upside down, then I clamp the bike either high or low so it doesn't twist in the jig. This holds it in place, rock solid.

  • 1
    I have this and a proper workstand that I mount in it. The stand is actually on a plate that bolts to the ground, but I don't have space for that so I just hold it in place with the vice. Admittedly this is a proper engineering vice on a solid workbench, it wouldn't work with a 5kg portable workbench. The stand itself weighs 10kg.
    – Kohi
    Jul 15, 2012 at 23:08

I have built a number of workstands in the past, and it's very difficult to get something as good as the clamp that comes with a decent bought one. Also, many of the cheap "home" stands have useless clamps that make them not worth the hassle. In my experience Park workshop stands are the best, and the copies of those work just as well. Buy the clamp and bolt it to something solid, portable stands are not worth the hassle (they wobble).

enter image description here

The more a "work stand" looks like the transport rack on the back of a car, the less usable it will be. The are easy to make, and that's what I've made in the past. My welding stand is as basic as you get - it's a couple of 10cm lengths of angle iron, one welded to the fixed stand and the other welded to a cheap pair of vice grips, that are welded to the stand. It works, but it's brutal and it's not adjustable enough. Many of the cheap "work stands" differ from that only by having padded jaws.

enter image description here

If you have a work space that you can hang stuff in, the various "hang my bike" rope systems are quite usable, or you can build your own with some pulleys and rope. I do that for my larger bikes (I have a long john and a quad bike), but they're somewhat annoying as the bike isn't held rigidly - it sways when you push on it. It's as bad as using the cheap, light workstands with skinny poles that bend when you push on them.

enter image description here

There are lightweight stands that hold the bottom bracket, so they don't have the long pole going up to shoulder height, and they work relatively well for most maintenance. You can't apply a lot of force to the bike in those stands, but for 90% of the work you do on the bike that's not an issue.

enter image description here

If you have somewhere to bolt it to, I suggest getting the Park clamp and be done with it.


I built one out of timber, part of an old car bike rack (you could easily pick up a damaged one 2nd hand for this) and a few plumbing fittings. I usually use it for storage, but I built it as a work stand. The timber was left over from other jobs, all the other bits were parts I had anyway, so total cost was zero.

Realistic cost in the region of £30/$50 if you don't have to buy a bike carrier (which was disassembled, not destroyed in the process). I also painted it with fence paint so I can leave it outside if it gets in the way, or use it for cleaning bikes if I want to get the gears to a nice working height.

The upright is only 2x2" though, I'd recommend a fence post instead for stiffness. I'll try to get a picture at the weekend, when I can get to it in the light.


It may be possible to improvise a stand with PVC pipe. A quick websearch brought up this instructable (http://www.instructables.com/id/PVC-Bike-Repair-Stand/) but there are many more designs. PVC pipes are pretty cheap, and you can buy a small hacksaw to cut sections as you need. The notable problem I found was that because the pipes weigh so little you need some ballast, or the whole thing can tip over.

If space and weight is not a concern (and if you have access to cheap welding), you should be able to do the same with L-sections of mild steel (this is pure speculation).

enter image description here

  • Great work - have a present!
    – Criggie
    Dec 30, 2016 at 5:36

I suggest buying one. They come in very handy for all sorts of tasks, especially if you are into doing your own maintenance.


My dad's garage contains a large workbench with a bench vise mounted on it.

He takes a piece of flexible closed-cell foam, perhaps 1 cm (0.25") thick. He wraps the foam so that it protects the bottom and sides of his bike's top tube. Then he puts the wrapped top tube inside the bench vise.

This works fine for him.

  • I have done the same with a kids bike, but clamped a wheel.
    – BPugh
    Nov 20, 2013 at 18:55

For years I used three old tubes that I staple gunned to a basement ceiling. It worked great.

I had one tube that I wrapped around the seat and two tubes for the handlebars.

  • I may have to try this. I certainly have enough busted tubes laying around. Sep 24, 2015 at 21:21

I used some pipe, an old concrete umbrella stand, and some motorbike tiedown straps to make this:

Its intended to hang off my landrover (the toolbox-on-wheels) for community fixups. The whole thing unbolts and fits in the back. Can also tie a tarpaulin over the top for on rainy days, and provides easy access to the toolboxes and spares in the back. I also have some old plastic pallets that provide footing if its muddy.

The pictured scene was doing some video testing of freewheeling for a front hub motor compared to a normal front wheel hub. This conclusively proved that the electric motor freewheels about the same as a normal wheel when unpowered.


Take a lighting or speaker tripod/stand and mount a bar on it. Onto that bar mount two pipe brackets on it with the movable part removed. The pipe brackets should have rubber pads in them to prevent your frame from getting scratches and moving around.

You can buy such stands for under $50. Pay attention to the maximum load these stands take.

Tip: you'll probably find tripods/stands easier in a dumpster than you find repair stands in a dumpster.


If you already have a bike carrier that attaches to a trailer hook, you can also consider a trailer hook to mount on a wall and then mount your bike carrier on it.

It won't replace a true stand, but it can make tasks such as cleaning the bike or some maintenance operations. For carriers where the bike is hung at the top tube, it's also possible to make some drivetrain maintenance, by hanging the bike at the further position.

Another side benefit of this method is that you can use the hook to store the bike carrier, and also the bikes.

wall mounted trailer hook


A repair stand isn't necessary. Wheel changes are bit harder, but hey, nearly every one of us has removed a wheel due to puncture on the road so you can change a wheel. Chain cleaning, chain changing and disc brake pad changes require you to kneel but if your knees are in good shape that isn't an issue.

I have assembled a complete bike from parts without a repair stand. I did everything except installing the headset (because I didn't have headset tools back then). I even built the wheels.

Today I have a repair stand for convenience, but it isn't strictly speaking necessary for anything.


Probably not the best, but my bikes have a double leg kickstand that will pick one of the wheels off the ground. Then I can put it on a regular workbench or table.

  • Surprisingly effective, if you can strap down the front wheel to raise the rear off the ground.
    – Criggie
    Dec 23, 2016 at 5:45

I got an idea of making a pretty good repair stand from this youtube video.

Basically you take a cheap front hub and attach it to a small saw horse or builder's stand. I'm planning on building something similar but have not been able to source a stand yet. I might attempt to use and Ikea Finnvard trestle.

  • I once had something similar, and instead of a front hub I drilled a hole through the wood, and put a long piece of threadded rod (allthread) with two nuts on the end and a lot of washers for various spacing. Best thing about this design is you can still turn the pedals and actuate the chain and shifting.
    – Criggie
    Jul 22 at 21:38

I have been using this stand to service my bike and storing it too;

I have been repairing and storing my bike with this stand here;

They are very cheap, at around 20 MYR (5 USD). You could start with using this first and if needed, go get an actual bike service hanger.

For storage, these hook under the left-side chainstay and seatstay,and balance the bike from falling. You can raise the height to lift the rear wheel off the ground when working on it.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.