I've bent (again) my derailleur hanger. It's a replaceable hanger but for this summer I can't get an original one and I know that the non-original one I can get is made in a harder material and could possibly damage the frame.

So I'm left with the choice of straightening this light aluminium alloy thing. How do I do that without breaking/weakening it?

  • I was under the impression that unless its an emergency (i.e. you need to get home, or can't get to the shop until next week) you generally don't bend it back unless its a slight bend. I've heard of people bending back hangars that are part of the frame (like on most road bikes) but not removable ones.
    – crasic
    May 9, 2011 at 4:46

5 Answers 5


Remove the derailleur and use an adjustable wrench to bend it back into shape on the bike. That way you can see when it's straight more easily. Remember to check both vertical alignment and fore-aft alignment. With 5/6/7 speed doing this by eye will be fine. You might get good enough for 8 speed, but with 9 and 10 speed you'll have to be lucky to get reliable shifting using this method. Those setups are just too fussy.

Bike shops have a derailleur hanger alignment tool that does this much more accurately by screwing into the derailleur mounting hole and letting you gauge position against the wheel rim. I've found that with 9 speed often a couple of millimetres at the rim can be the difference between smooth shifting and constant "not quite in gear" clicking in one or two gears.

Edit: this is a classic "trivial with the right tools, impossible otherwise" job on 9 and 10 speed systems. Put the bike in a mechanics workstand, attach the alignment tool, bend the hanger, reattach the derailleur, check the gears and it's done in 5 minutes. The bike shop will probably want to put in a new gear cable and housing for you (because otherwise if the shifting is less than perfect you might blame them rather than the friction in your old gear cable).

The fun part, BTW, is finding a replacement hanger if the bike manufacturer no longer stocks them. There are "clone" manufacturers but the catalog of available hangers is huge (often one bike model has different hangers in different years, so unless you know exactly which frame you have the label on the frame might not help much).

  • The replacement I've found is made in 6061 T651 alloy, my frame is 7005 T6. Do you think I can safely use it? (should I post this as a new question? or is it too specific?)
    – bigstones
    May 9, 2011 at 10:48
  • Yes, they're just minor variations on the "hardened aluminium" theme.
    – Мסž
    May 9, 2011 at 22:15

Also check out http://derailleurhanger.com when you just can't get it straight. The fact that there's a web site out there that only sells derailleur hangers is what makes the interwebs great.


I've had luck by removing the hanger and then using a vise to clamp the whole hanger flat. Whatever you do, remember that you've got one, maybe two shots at it...too many bends and it's gone.

  • This might work, and as a fallback has the advantage that you can crush the adapter slightly to get a little more life out of deformed threads. But remember you're trying to get it straight to better than one degree, which is hard to see when it's in a vise. IMO better to do it on the bike.
    – Мסž
    May 8, 2011 at 23:06

A caveat... Aluminum is very susceptible to "work hardening". Some alloys are softer than others, and you may get away with it OK. I have done it on one of the department bikes... So far so good. However, there's always the danger the thing will just let go.

Better to replace if possible.


Video here shows how to do that using appropriate tools and just a simple hex key. The video is in Spanish but images are pretty much descriptive. Note the video has 2 parts. Second one starts automatically after the first one.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.