What are the differences between gloves and track mitts? (other than the obvious lack of covered fingers)

  • 2
    This doesn't answer your question, but I wear fingerless gloves for two reasons. One is that I don't get blisters, skin irritations, or other dirt on my hands from gripping the handles. Two is if I fall I can use my palms to the pavement without shredding them.
    – Apreche
    Commented May 11, 2011 at 11:52
  • @Apreche - Also apparently people get numb hands from the vibration: and gloves (e.g. with padding sewn in) absorb that vibration. Also, sweaty palms would cause the grips on the handle bars to deteriorate.
    – ChrisW
    Commented May 11, 2011 at 12:11
  • 3
    Track mitts are fingerless gloves, right? So this is asking about fingerless vs. full gloves?
    – amcnabb
    Commented Jun 1, 2012 at 4:34

3 Answers 3


I've used both fingerless track mits and full-fingered gloves. I've found the main difference comes from what you intend to do, and how long you want to do it.

Comfort: I found the fingerless mitts a lot more comfortable, making them great for longer rides. This would be especially important if you're looking at touring through a residential area, taking the long commute to work, or otherwise staying on roads. Once the temperatures start to drop however, the comfort of the fingerless mitts is defeated by the cold, so it's a good plan to switch up during these conditions.

Protection: When just biking around the city, chances are if there's an accident, having your palms protected by the fingerless mitts is enough. With smooth ashpalt beneath you, your fingers aren't going to do much in assist in breaking your fall. When mountain biking however, every bit of extra protection helps. The full-fingered gloves provide enough protection to keep your hands working well after most collisions, flips, slides, and scrapes. They won't do much to prevent a full-on break, but stopping a lot of scrapes and bruises can be a lifesaver, especially if you use those fingers for your living.

Sweat: Both gloves do provide some wicking. The long-fingered gloves pull the sweat from the entire hand, whereas the fingerless only grab the palm. This can make a huge difference on exhausting rides as the grips on the bicycle get covered in sweat.

Grip: Although both types of gloves provide additional grips via the palm, only the long-fingered gloves provide additional grip in the fingers. This can provide a lot of advantages if you're worried about aging handlebar grips, or are forced to discard the grips after an accident and cycle back to town using only the raw handlebars.

Tactile Sensation: Here is where the fingerless gloves shine. Because they're still fully exposed, you can feel everythign with your fingers as per normal. This means you can quickly pull over to check your cell phone, fiddle with your bike computer, or whatever else you may need to do that requires fine motor skills in the middle of your trip.

Although I've come to miss my tactile sensation, I've found the full-fingered gloves to be more useful on the whole and have opted to use them for the majority of my cycling trips.

  • Fit: Track mitts have a very different fit around the palm because the cut does not have to take care of finger length, especially the change of finger length when bending the fingers.You will notice mitts fit snug around the circumference of the palm. This allows to use different materials, which do a better job of protecting the palm from chafing or road rash. Gloves need room at the back of the palm to accommodate the pull of material around the knuckles of bent fingers.

In my opinion, track mitts have a much better feel on the palm, even with a comparatively stiffer material.

  • Protection: Track mitts only offer protection from controlled crashes where you land on your palms. Mountain bike gloves are made to protect the outside of the hand, particularly the knuckles. The gain in protection is well worth the downsides in fit and chafe protection. Additionally, rides where you need protection of your knuckles are not as long usually. (Mmmhhhh 100km downhill!). Btw, historically, track mitts started as breaking gloves. 100 years ago, they used to brake with the leather palm.

I do have winter gloves that are made specifically for bicycling, and they do a good job of warming the hand. But the more elastic material on the palm shifts all over the place on long ride, despite the seemingly snug fit of the gloves.

Btw, I once had some particularly comfortable track mitts that completely failed in the protection department, on a crash the palm material just peeled away from the palm. Go leather, I say.


The difference between full-fingered gloves and track mitts, besides for the obvious fingerless part, is that with the mitts you have the added advantage of material that flicks sweat off your hands giving you a more comfortable ride. Additionally for both, different gloves come with padding or gel that takes some of the pressure off of your hands to give you a more comfortable ride.

Personally I would not ride without them. They make you able to ride long distances because they take one more thing off of your mind while riding.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.