6

I found one that a guy made I think with 3d printers or something but seems like an excellent solution.
enter image description here

I have a carbon frame bike and I don't want to use traditional ulock mount at the top because it creates a stress point by compressing. And the bottom section of this bike is too thick for the holder.

  • 2
    I don't have an answer, but that's a great idea. Downsides are that your lock is a lot heavier than a pump and water bottle, So the mount might need more thickness/meat, which means longer bolts. The weight could be more manageable if you were prepared to forgo a water bottle in that position too, to keep the lock on the centerline. – Criggie Apr 27 '16 at 2:21
  • 1
    On a steel frame yes, but I have serious doubts with a carbon frame. The stress on the bolts may tear them out since the wall thickness is probably not meant to withstand the weight and the vibration from road-use. – Carel Apr 27 '16 at 7:43
  • @carel - A water bottle mount is intended to hold a 800 ml bottle of water, so 800 grammes and some people mount pumps/inflaters there too. So assume 1 kilogram. But these locks weigh somewhat more than that. Nolawi, how heavy is your lock? – Criggie Apr 27 '16 at 9:53
  • 1
    @Criggie: The weight and the CG of the bottle are closer to the frame so there is less leverage. – Carel Apr 27 '16 at 11:08
  • 1
    It ways about 2.2 lbs – nolawi Apr 27 '16 at 16:35
1

This isn't a ulock, but it's the same idea.

enter image description here

It's a 0.9 lb bike lock made from Titanium. They cost $99 and come with a water bottle cage mount as shown.

TiGr® mini Bike Lock enter link description here

enter image description here

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.