There are several models of Campagnolo road quick release skewers, including the Type 20, Type 40, Khamsin, Record, and Bora/Hyperion/Bullet models. The price differences between the models varies greatly. However, I can't find any descriptions of what the differences are.

I have a standard 11-speed road wheelset with 100F/130R spacing (not Campy), and I'm looking for a Campy internal-cam skewer set for them. Which Campy skewers will work and are there materials, construction, or weight differences? Thanks.

  • 2
    Skewers are interchangeable on standard wheels and not brand specific.
    – Carel
    Commented May 20, 2016 at 8:27
  • Carel, thanks. Are there materials, weight or construction differences that would help me choose between the skewers? Otherwise, why would the prices range so much between the models? Commented May 20, 2016 at 16:53

1 Answer 1


With respect to @fandango68, there are a number of misstatements. This part appears correct:

Type 20 - Shamal Ultra, Eurus, Zonda and Neutron Ultra Wheels

Type 40 - Vento, Khamsin and Khamsin CX Wheels

Generic - everything else

I added links to stores that sell the first two types of skewers. I can't find a generic level of Campy skewer. Note that the wheels for the type 20 skewer are higher end than the wheels associated with the type 40s. Also, there is one higher-end class of Campy skewer supplied with their Bora, Hyperon, or Bullet wheels. I'll call these the Hyperon-level skewers.

From browsing Internet catalogs, the Type 20 and the Hyperon-level skewers are an internal cam design, meaning the cam mechanism that closes the skewer is shielded from elements. These produce greater clamping force for the same lever input than external cam skewers. The 40s appear to be external cam, as corroborated by this post on Velocipede Salon. External cam skewers can be made lighter than internal cams.

There are probably some material differences between all the levels of skewers, but I have not physically held any of them. I had one pair of Record skewers from the 10s era, about the mid 2000s. The cam housing, levers, and the rods were steel, (tested with a magnet). The nuts were aluminum. They were heavy but very pretty and functional. The current type 40s are aluminum nuts and levers with steel rods (also tested with magnet). The cam mechanisms should be steel. There may be differentiation between the level 20 and the top level skewers. For example, Shimano's Ultegra skewers have more plastic or other composite than the Dura Ace skewers, which are all aluminum except for the rods and cam mechanism.

External cam skewers are usually lighter, but they can get more easily contaminated, and they take more effort to close. Cheaper external cam skewers often use plastic nuts and levers, but I haven't examined the Campy level 40s.

Personally, I prefer internal cam skewers. Some reading is here, and more is here (paywall).

Last, this wasn't asked, but there are some points I wanted to address in the other answer. There is absolutely no reason to

... only use Campagnolo skewers on Campagnolo wheels...

Campy skewers will work with anybody's wheels, provided the hubs take quick release skewers. Although Shimano and Campy are long-time rivals, Shimano skewers will work with Campy wheels or vice versa, with aesthetic mismatch being the only consequence. Also, I haven't really seen this:

it's ridiculous to think a Campagnolo skewer is also marketed specifically to the number of cogs on your cassette - 9, 10 or 11 speed variations! It's just marketing spin.

In that context, people use the number of speeds like a model number. Shimano has explicit model numbers (e.g. DA 7700 is early 2000s, 9s Dura Ace), but Campy does not. However, if I said 10s Campy Record (like I did above), an educated consumer or mechanic would know that this refers to components from the early to late 2000s.

Since about 8-speed, road bikes have had 130mm dropout spacing. "8-speed" Campy skewers will work with any road bike that takes QR skewers that's been built since that era. Thus, that assertion is also incorrect. The worst that could happen is an aesthetic mismatch.

  • @DavidRicherby a lot of my previous answer was actually an erroneous cut and paste from the earlier answer. I had meant to edit most of it out. I corrected my answer. That said, you may also want to direct this criticism to him - he was the one who discussed the history of QR skewers first.
    – Weiwen Ng
    Commented Jun 20, 2018 at 19:31
  • Aha! Makes much more sense, now. Thanks for editing. I’ve deleted my comment on your answer and put something under the other one. Commented Jun 20, 2018 at 20:41
  • 2
    Adding to my previous answer: my "10s" Campagnolo Record skewers are not actually all steel. I took mine out and used a magnet on them. The endcaps are both aluminum. The lever appears to be steel, the rod is definitely steel. I'm switching to Shimano, and I got a pair of 6800 Ultegra skewers. The left endcap is actually plastic, but it houses a serrated steel ring to help clamp the dropouts better. Right endcap appears to be alloy. So does the lever.
    – Weiwen Ng
    Commented Jul 6, 2018 at 17:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.