I plan on converting my MTB fron 3x8 to 1x8.
I plan on leaving the rear derailleur as it is, or I would prefer not to upgrade it to save money.
My current crankset is a 3x8 square taper crank, I have yet to measure the bottom bracket but it'll be probably a 68 or a 73 shell, with standard BSA/ISO threading.
Part list installed:
Part list to purchase:
BSA threading is universal/standardized right ?
If I purchase a 1x10 crank or a 1x11 crank for example I could install it on 1x8 setup right ?
What compatability issues should I look out for ?
Are the listed parts compatible with each other ?