0

enter image description here

Do you know what size my handlebar has? I want to buy a new pair of Tektro brake levers and I do not know what steps to take about it

1

You need to measure the grip area diameter (the diameter of the handle bars where the brake levers clamp onto). I'd suggest using a pair of calipers.

22.2 mm will fit flat bar (typically mountain bike/flat bar road) components, 23.8 mm will fit drop bar (typically road) components.

Note that you need to also get compatible pull brake levers -- in your case, you have a caliper brake so you need a short pull brake lever (ie. one that is marked for not linear pull/V-brakes).

  • If you can't have hold of calliper just roll a strip of writing paper around the bar and mark one full turn on the paper. Measure the marked length. With the type of bar in the picture (quill stem) it will most certainly read 69.7mm for a 22.2mm bar. A 23.8mm bar has almost 75mm circumference, a noticeable difference! – Carel Apr 24 '18 at 19:52

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.