I have an Ultegra 6870 Di2 groupset and I would like to use synchro shift.

In e-tube project, I select Customize, then Shift Mode Setting.

And I have an error message telling:

If SM-BRM1/SM-BRM2/SM-BTR2 is connected, shift mode will not function even if set.

What does it mean ? I can see that SM-BTR2 is the built-in battery, that I have on my bike.

Is it possible to use this function with 6870 ? If yes, how ?

Thank you


It is possible to upgrade your groupset to be Syncro-shift compatible. All you need is the new BT-DN110 battery. Once you have the new battery, you just need to update all the firmware, then set it to Syncro-shift with the e-tube software.

  • This article explains how to do the upgrade. May 3 '19 at 15:47
  • Thanks! But it's annoying to have to buy a new battery for that..
    – iAmoric
    May 3 '19 at 22:02
  • 1
    It's unfortunate, but the chipset in the battery is what runs the Synchro Shift processes so I don't think it's avoidable. May 4 '19 at 7:16
  • The hardware for that function sits in the battery. It is clever marketing to make you buy new stuff.
    – Carel
    May 4 '19 at 13:11
  • Better have it done at a licensed shop. The firmware update disabled the left grip which is the first in line to update and the whole system went belly-up. There's no backtrack and any update failure ends in a locked system.
    – Carel
    May 4 '19 at 13:15

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.