1

On one of my old bike, I have a twisted Presta valve: twisted presta valve

Unlike this user, I can't put glue on my valve because the air is leaking at the tip of the valve (where it is twisted). So, I want to know if I can change only the tip of my valve or if it is possible to just change the valve without throwing the tube.

|improve this question
  • twisted? nothing looks terribly off in this photo besides the rust at the base of the valve. could you describe this a little better? if the very left-most tip is bent, you can just bend it back with your fingers and it should be fine. – Paul H Jul 23 '19 at 16:08
  • Indeed, the picture don't show it very well but the tip is really twisted and, when I screw it, air is leaking through it. There is no leak from the base of the valve despite the rust. – Pierre Jul 23 '19 at 16:16
  • 1
    twisted? or bent? – Paul H Jul 23 '19 at 16:22
  • @PaulH I'm sorry but I'm not sure to understand the difference between twisted and bent (I'm not a native English speaker). – Pierre Jul 23 '19 at 16:29
  • 3
    Just replace the tube. It's not like they're expensive. Yes, there's an environmental impact but there are much bigger fish to fry in that regard. – David Richerby Jul 23 '19 at 23:03
6

As noted in this old question there exist Presta tubes from which the valve core can be removed; in this case it might be possible to replace the valve core.

However, yours appears to be a single piece valve (non-removable core).

removable vs non-removable core Presta valves

Since the valve is otherwise trash, I would try gently bending it straight using a pair of pliers. If it breaks, or doesn't straighten you're no worse off, since you'll have to discard it anyway.

|improve this answer
  • Yep, use the pliers on the upper threaded portion. Of course, you'll need a replacement piece salvaged from another tube. – Daniel R Hicks Jul 23 '19 at 17:08
  • @DanielRHicks What do you mean by "you'll need a replacement piece salvaged from another tube"? Can I just replace my valve with a piece from another tube? – Pierre Jul 23 '19 at 17:58
  • @Pierre - Yep, that's what I said. I said "salvaged" because you'd presumably use the piece from an old tube vs rendering a new tube unusable. – Daniel R Hicks Jul 23 '19 at 21:29
  • If I bin a presta tube, I always save the core inner in a little jar assuming its one of the removable ones. – Criggie♦ Jul 24 '19 at 5:11

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.