I’m building up a Soma Wolverine with a Gates Carbon Drive and Alfine 11 internal gear hub. The Gates literature indicates that the beltline should be 43.7 mm +/- 1mm.

I am trying to use an old crankset I have on-hand, a Sugino RD2, which has a 45mm chain line when using a 103mm bottom bracket. Obviously this is slightly out of spec with the Gates belt line requirements

My question is, can I use an adjustable Phil Wood bottom bracket to make up the 0.3-1.3 mm difference in beltline? Would it be better to have the bottom bracket built with an offset spindle, which it sounds like Phil Wood can do? Or best to just buy a crankset from Gates?

  • I'm also looking to build up a belt-drive Wolverine with an Alfine 11. Did you ever find a solution? Feb 26, 2021 at 10:51
  • Its been 10 months since this was posted - did you complete this project? You're totally welcome to add an answer of your own for future readers, and provides closure. And I'm curious to know how it went.
    – Criggie
    Feb 26, 2021 at 21:20
  • 2
    @BikingViking (and Criggie, who I can't @, apparently): Yes, I found a solution and have posted my answer. Hope it helps. Feb 28, 2021 at 7:46

1 Answer 1


I did end up completing this project. I talked to several people, just calling up bike shops that sold or specialized in belt drive bikes and asking for opinions.

I spoke with someone—I think it was a fellow at Ben's Cycle/Milwaukee Bicycle Co.—who had lots of experience fitting belt drives to frames. He had even worked with Gates on building several belt drive-specific bikes. His take was that I was worrying about nothing. A 45 mm belt line was well within what he would expect to work without issue, even if it was specced for 43.7 mm. I even tried to let him talk me into buying a fancy Phil Woods bottom bracket or a Gates crank and BB set. He said it would not be worth it in this instance. 45 mm was close enough to work.

At that point I just went ahead and installed my 103 mm bottom bracket and the Sugino RD2 cranks. I finished the bike and have been riding it pretty much daily since. I don't think I'll go back to chains if I can help it. The Alfine hub shifts super smoothly. The whole setup is quiet and reliable. It's great not worrying about keeping a chain clean and oiled. I highly recommend it.

  • 1
    Congrats - have some bounty rep for coming back with completeness.
    – Criggie
    Mar 2, 2021 at 10:47

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.