3

My bike has lugs for mudguards/rack down by the rear drop-outs, but not in the usual places at the top of the seat-stays.

My two options seem to be:

  • use P-clips around the seat-stays
  • fashion a single bracket extending from the centre of the rack to the bolt-hole on the rear brake bridge

The first option seems easier and less fussy, but perhaps there's another way.

3
  • Sunlite racks actually come with a bracket that fits to the brake bolt. I personally prefer p clamps because they allow a higher position, but they can run the paint off even if they are rubber coated
    – Andrew
    May 27 '20 at 0:59
  • @Andrew: Wrap rubber or duct tape around the seat stays before you tighten the clamps.
    – Michael
    May 27 '20 at 6:05
  • The bracket I made has broken. topeak.com/global/en/products/99-Replacement-Kit/… looks like a stronger way of uniting the rack with the frame; are there other parts available that do the same job? May 20 at 20:37
6

The two options you mention are widely used.

Another option is a seatpost clamp with rack mount points
There are a variety of makers and styles, here is one example.
enter image description here

3
  • I have an old steel frame in which the clamp is part of the seat-tube, so the clamp you suggest sadly won't work (otherwise it would have been ideal). May 26 '20 at 22:27
  • @DanieleProcida, in that case just make/purchase some shims and clamp around the post only. ¯\_(ツ)_/¯ May 27 '20 at 10:09
  • 1
    @DanieleProcida What is the downside with P clamps? I don't like them because they are ugly and clunky but I'd use them if I had to. Is clamping to the seatpost an option? There are versions of this clamp for seatposts. Old steel frames are wonderful
    – David D
    May 27 '20 at 13:19
3

You can attach the rack to the brake bridge, yes, any decent bike shop should be able to do that when installing the rack.

Or you buy a rack that clamps to the seat post: the Pletscher quick rack system will attach directly to the seat tube, so no need for the eyelets. https://www.pletscher.ch/index.php/en/products-en/carriers-en/quickrack-carriers-en They carry up to 25 kgs, as other racks.

Or you can go fancy https://www.tailfin.cc/

3
  • A rack which attaches to the brake bridge will be much lighter. For example the Tubus Fly weighs 420g while the Pletscher Athlete is 940g.
    – Michael
    May 27 '20 at 6:07
  • @Michael I guess the Pletscher is a bit over-engineered, because it provides the quick removal possibility, with no tools it can be removed simply by releasing the QR and rotting backward and sliding out.
    – EarlGrey
    May 27 '20 at 14:40
  • +1, single strut to brake bridge is the right answer. May 28 '20 at 18:10

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.