1

Does claris R2000 crank arms can fit ultegra 6800 chainrings?

1 Answer 1

1

Claris - https://bike.shimano.com/en-US/product/component/claris-r2000/FC-R2000.html

Ultegra - https://bike.shimano.com/en-US/product/component/ultegra-6800/FC-6800.html

They have the same PCD and chain line which are the two measurements that show you whether the chainrings will sit correctly. I would be surprised if they weren't compatible based on this but I'm not 100% sure they are so take this with a grain of salt. Their Q-factors are different but I doubt most people would notice 3.4mm difference.

2
  • Take a closer look at the branches. The Ultegra are thinner. There will be a step if you cross-fit them
    – Carel
    Jul 18, 2020 at 7:43
  • @Carel yes but they will likely fit, I think OP realizes that they won't match aesthetically Jul 21, 2020 at 2:29

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.