3

I've got a prebuilt MTB that came with an SRAM NX drivetrain and Guide T brakes and I'm looking at upgrading the drivetrain to higher end parts. I'm thinking about taking the upgrade opportunity to switch to the Matchmaker X system, the new shifter will definitely be compatible and I can get hold of a clamp like this without an issue: SRAM Matchmaker clip

I understand that the new shifter will be attached to the screw thread facing downwards. The SRAM website claims my Guide T brakes are Matchmaker compatible too (https://www.sram.com/en/sram/models/db-gde-t-a1) but it doesn't look like it from their picture as its a two bolt clip similar to this image. My brake body has half the clamp molded into it, then the second piece fits on the back.

Brake clip with two bolts

The Guide R below appears to be attached through Matchmaker, but the body is a completely different shape below. It appears to have a small wedge with a hole for the Matchmaker clip's bolt to fit through

Guide R

I'm either missing something silly, or are there are multiple versions of Guide T brakes with different body styles that SRAM doesn't make clear on their site?

5
+100

Further research shows there are two systems, Matchmaker and Matchmaker X. My Guide T brakes allow the use of Matchmaker and the new Eagle Shifters use Matchmaker X. It seems as though all of the other Guide brakes (including the R in the bottom picture above) use Matchmaker X.

I either need to find a Matchmaker clamp adapter like this https://www.sram.com/en/sram/models/db-acc-mm-a1 or swap my brakes at the same time.

6
  • 1
    Great finding, thank you for coming back to share the answer. Yet another incompatible standard... its like manufacturers do this intentionally.
    – Criggie
    Feb 4 at 21:23
  • 1
    @Criggie yes, and even worse that models in the same range match different standards with similar names :( Feb 6 at 18:13
  • 1
    I found this chainreactioncycles.com/mobile/…
    – JoeK
    Nov 20 at 16:57
  • 1
    @JoeK this question is 9 months old. It's quite possible that item was out of stock at the time. Nov 23 at 13:58
  • 1
    @JoeK I've updated the above answer (you could have too). But for posterity it said "Unable to find", draw what you will from the temporary or non-temporary implications of those words. Nov 24 at 21:25
2

Yes! The Avid Matchmaker part I ordered from Amazon fit exactly with the Guide T brakes. I ended up just using the bolt and the two small metal pieces. I saved the “big” bracket that actually attaches to the brake lever because there was nothing wrong with mine and didn’t feel like removing, installing the new part and adjusting the lever. enter image description here

0

I had this same question... looks like the Guide T uses the original MatchMaker design from Avid. I found it on Amazon here in the US https://www.amazon.com/gp/product/B001U6KI78. I just ordered one pair to see if it works with my brakes. I'll post later how it went.

1
  • Please do update this! You also appear to have created 2 different accounts; you should check out the help on merging your accounts.
    – DavidW
    Nov 12 at 22:31

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.