Does anyone happen to know know if these Cane Creek "universal" hoods are compatible with these vintage Shimano 600 (BL-6400) levers?
It's okay if they don't fit quite perfectly or if I have to trim them a bit to get them to fit.
-
1Why don't you buy the correct hoods available lots of places eg velovilles.com/en/parts/Hoods/Aero-Hoods-oxid-2.html– NoiseCommented Mar 15, 2021 at 23:03
-
@JoeK Because my levers are the old non-aero version, and the cable routing on mine is done through the top of the lever, not through the body. Notice there's no hole on top of the aero hoods. But I guess I could cut a small hole for the cable.– Victor StanciuCommented Mar 16, 2021 at 3:11
-
2I see! Well, it's easier to make a hole than cut a curve to match the lever body in this type of rubberised material, so long as the rest of the hood fits.– NoiseCommented Mar 16, 2021 at 7:30
Add a comment
|