I am attempting to adjust my front gears and have also been following a video to adjust the high/low position of my front derailleur.
The issue I am having is that the low adjustment is no where near the 2mm distance that the chain to front derailleur should attain. The photos below also show the distance I can achieve.
Now I am wondering; Is the angle of my front derailleur is incorrect? If so, what should I line it up with?
I have supplied a couple of photos. Please feel free to ask for additional info.
The photo was taken while the the rear gear was on the biggest cog and the front gear was on the smallest cog. The chain is almost touching the front, pedal side of the derailleur and the chain is almost touching the derailleur at the back on the frame side.