I bought the following powermeter: https://www.mantel.com/de/4iiii-precision-105-r7000-left and shortly after i had to Switch bikes.
I (will) have the following bikes:
Bike1 (current bike): https://www.boc24.de/p/compel-rr-100/213327/#itemId=213327-1
Bike2 (potential): https://www.canyon.com/de-at/gravel-bikes/all-road/grail/grail-6/2369.html
My first bike has a shimano 105 crankset. The Canyon a Shimano RX600, see https://www.canyon.com/de-at/gravel-bikes/all-road/grail/grail-6/2369.html#all-components-section-tab.
The Installation of the powermeter:
I watched the following video:and feel like i am missing parts like: https://www.mantel.com/de/shimano-tl-fc16-hollowtech-2-ii-crank-cap-tensioning-installation-tool and maybe a second one?
So i went to the bike shop where i bought my bike and they said the powermeter would not fit the bike. I am a bit surprised, because i have a shimano 105 crankset on the bike and the powermeter says shimano 105. I am not sure what the r7000 specification is for and if it would fit the Canyon as well, but ok.
If i can savely assume the bike shop was wrong, which material am i missing to install the powermeter?
The current crank: