3

I'm currently assembling a bike. I bought a Shimano mt210 3x9 (44/32/22) crankset. I'm wondering what maximum teeth cassette should I buy that will be suitable and compatible with this crankset? Also what chain should I use for a 3x9 setup with my crankset and future cassette

Additional info: Will also be using a 3x9 m3100 alivio groupset

Thanks in advance for the answers. Ride safe everyone!

Improve this question

1 Answer 1

Reset to default
7

36 tooth.

The MT210 is used in a number of series - M3000 and the M4000 series. The RD-M4000 rear derailleur has a 36 tooth limit for its largest sprocket. It also has a capacity of 45 tooth, which means 11-36 cassette on 22-44 chainrings.

These are published maximums, while Shimano is conservative with these numbers, and some people will claim success with larger cassettes, I would not recommend going larger. 36/22 gives a very low gear at which time getting off and walking is often faster, and a larger cassette is likely to cause problems such a spoor shifting and too large jump between gears.

Improve this answer
2
  • 2
    Being of those who claim to have installed a 42T cassette on a M3000, I confirm the shifting performance is degraded: it was a compromise I did to have a wider range (because I have a double chainring in the front). With such a triple chainring, I certainly don't recommend installing a bigger cassette. It can also make sense to install a 34T cassette: the difference with a 36T won't be noticeable, and you'll stay closer the rated capacity of the derailleur (with a 36T, you'll exceed by 2 teeth).
    – Rеnаud
    Jul 1, 2021 at 9:13
  • It's not just that walking is faster. I used a 22 / 36 ratio on a 27.5" wheel bike and found the ratio to be so low as to be nearly unusable. I found it hard to keep balance and keep the front wheel on the ground. This may not be an issue for a more skilled rider (but then the rider is presumably stronger too?) or for a bike with a different geometry.
    – Szabolcs
    Jul 1, 2021 at 11:11

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.