1

I decided to replace my front brake pads since they are worn out beyond function. So after removing the old pads, I made sure the piston was fully out, and the adjusting screw was fully tight as well, and still I could not get both of the pads in. I can get only one of them in perfectly so I do not doubt a compatibility issue.

I decided to take out some of my worn-out brake pads from the rear brake so at least I would have some braking power in the front but I could not remove the rear brakes because they were also too thick to get out. What other options do I have other than manually opening the caliper in half?

4
  • 1
    Hi, welcome to bicycles! As always, some pictures might help; something a potential answerer can't quite imagine might be quite obvious to them when looking at a photo.
    – DavidW
    Apr 12, 2022 at 16:00
  • There are some calipers where you have to sequence the inner and outer correctly or you won't have the clearance you need - let us know what brake you have. Apr 12, 2022 at 16:27
  • Thanks for the responses, will attach a picture once available, in the meantime I'm afraid I am using an off-brand caliper that came with the bike. My bike is a turkish "Volta VB1" ebike, if that helps though. Apr 12, 2022 at 17:26
  • Related - possible dupe: bicycles.stackexchange.com/questions/32745/…
    – Criggie
    Apr 12, 2022 at 22:13

2 Answers 2

1

I've asked around other people who use the same brakes, turns out I have to de-assemble the caliper and then install the new pads. Incredibly bad design but apparently it is what it is.

1
  • which caliper is this? as it stands, neither the question or answer is very information to future readers who might have a similar problem
    – Paul H
    Apr 13, 2022 at 15:24
1

I don't think it is a pad compatibility issue: I believe after market pads are the same width.

But the next step would be to try it without the cable attached at all. Also I would clean the pistons. They may be stuck.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.