12

I have mounted a new set of carbon rims on my bike. To be precise, it's a pair of Mavic Cosmic SL. And I've noticed that they have some little "holes" along the profile.

What are they used for? Since I'm planning to attach the stickers on them, I like to know if I can cover these holes with them, or I have to adjust the stickers in a way to let these holes free.

Sorry if it is a silly question, and thanks for any help.

enter image description here

2
  • 1
    Personally, I'd leave the stickers off entirely. I like the cleaner appearance. but mounting three stickers with three holes shouldn't be hard -- put each sticker between two holes?
    – arne
    Aug 19, 2022 at 9:03
  • 1
    @arne, I agree with you: in theory it is not that hard, but the fact is that those tyres already have little Mavic stickers on them (they are not visible in that portion in the picture), and I already have to take them into account. So, a lot of little details that overlap with the future stickers, and I need to cover the lowest amount of them :)
    – Andrea
    Aug 19, 2022 at 9:28

1 Answer 1

13

They are drain holes to let water out.

Light bicycle go into slightly more detail on their webpage: https://www.lightbicycle.com/newsletter/Holes-On-Your-Carbon-Fiber-Rims.html

6
  • Thank you for your answer. I've noticed that my rims have three of them for each side. So, basically, I imagine it is better to not cover them with stickers, but it won't be a big thing if one out of three would be covered (it's a bit difficult to place threes stickers by each side - as Cosmic standard - by leaving all of them uncovered).
    – Andrea
    Aug 18, 2022 at 9:28
  • 5
    @Andrea just poke a little hole through the sticker in the relevant spot after installing it.
    – MaplePanda
    Aug 18, 2022 at 9:30
  • Thank you, @MaplePanda: I will proceed like that.
    – Andrea
    Aug 18, 2022 at 10:18
  • 1
    Minor detail: I don’t think these drain holes are common, but these rims have a non-structural carbon fairing with entry holes for the spokes. So, the drain holes do actually help here. This is a relatively rare type of rim.
    – Weiwen Ng
    Aug 18, 2022 at 15:45
  • @WeiwenNg I would beg to differ as to your claim that these holes are not common. My Roval's have them and I have seen them in other brands as well. They may not be universal, but I believe they are more common than you imply. I could be mistaken however...
    – Ted Hohl
    Aug 18, 2022 at 19:42

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.