4

inner tube bough

I got a new inner tube for my bike and it's way bigger than the rim, It's just its usual size; didn't inflate it too much or anything like that. The older one I was replacing just fits fine. IS this too big and what side effects can this cause ?

enter image description here

2
  • 1
    What are the numbers on the sidewall of the tyre, and also on the packaging for the tube? 26" so there's probably a "559" somewhere in there.
    – Criggie
    Dec 27, 2022 at 6:00
  • 1
    Frankly, you can put almost any size of tube into any size of tyre... and as long as it doesn't create folds inside the tyre and doesn't require stretching to more that 150% of the original surface area, it'll work ok too. Dec 27, 2022 at 23:09

2 Answers 2

7

Some tubes are just like this. It is unlikely to be a problem in use.

Put a bare minimum of air into it - just enough to handle it, but not even the amount that fills out its base shape. From there, insert it into the tire. You will probably find that it also wants to be a little bit bigger than the tire. Distribute it all the way around so it's not kinked or folded onto itself anywhere. I usually kind of pluck and nudge it into place to do this.

If it does want to fold over onto itself no matter what you do, and you have to make it work, put some talc powder (or baby powder) in a ziploc bag along with the tube and thoroughly shake to coat, then reinstall it and pump it up. The talc helps it automatically distribute itself around evenly under pressure.

3

No, they are commonly like that for me, even if they are officially certified for my sizes. They may be more difficult to put but work well when installed. Maybe this is because some are certified for several diameters of the rim.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.