this is a Louis Garneau 20inch bike wheel
-
If you can't find the correct tool to buy, its possible to make one by sacrificing a socket of the right diameter and spending some quality time with a hand file or grinder+cutoff wheel+grinding wheel+dunk tank.– Criggie ♦Sep 16 at 21:55
Add a comment
|
2 Answers
The 8-pin freewheel tool, as available from brick lane bikes and others, is the correct fit.
You need the one sold as "BMX" freewheel remover. Usually they have 2 or 4 prongs, the extra slots on this freewheel will just go unused.
