3

Please see pictures. My rear wheel has a Deda Elementi hub which has a Thru axle. I have removed my 11-speed cassette and disc rotor. There is no lock nut on the non-drive side. There only appears to be groves for one 17mm wrench. It is the same on the drive side. There is a slot inside the axle where I can place a 10mm Hex. I'm looking to get at the sealed bearings in the hub so I can replace them. On a previous rear wheel hub, I used two 17mm wrenches on the non-drive side. Any ideas?

close-up of the non-drive side of the hub close-up of the drive side of the hub

2

1 Answer 1

4

I found the documentation for anyone who comes across this post.

enter image description here

1
  • 1
    Welcome to the site - thank you for posting your findings, it will definitely help the next person with the same problem.
    – Criggie
    Nov 24, 2023 at 12:28

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.