How long can I store an open jar of DOT hydraulic brake grease (e.g., SRAM or AVID)?

Background for question: DOT fluid is hydroscopic, i.e., it absorbs moisture from surrounding air and therefore keeping an open container for too long is not advised. What about the grease, though?

  • Does the container have a threaded lid ? Or is it a pop-top canister?
    – Criggie
    Commented Jan 5 at 23:03
  • I haven't bought a container yet - planning for a bigger maintenance round in near future :) But also conceptually I could seal a container tight or move the grease to a different container. The question really is, once it's open, does the first contact with air start some irreversible degradation that would turn the stuff to mush in a year. (My guess is not but I'd like to poll some experienced opinions.) Commented Jan 6 at 23:39
  • 2
    @NikKharlamov are you asking about lubricating grease or hydraulic brake fluid?
    – Paul H
    Commented Jan 7 at 3:48

3 Answers 3


A long time. Assuming you can store the container well maybe the rest of your cycling life unless you go on a brake maintenance bender.

It’s silicon based grease that won’t dissolve in DOT fluid or destroy DOT compatible seals.

  • 2
    Even if it does absorb moisture, the amount of grease involved means the impact from the absorbed moisture on the dot fluid boiling point would not be measurable (The whole problem with water absorption is it lowers the boiling point).
    – mattnz
    Commented Jan 6 at 3:04
  • 1
    Wait, are we actually talking about grease or DOT brake fluid?
    – Paul H
    Commented Jan 7 at 3:48
  • @PaulH grease for lubricating parts in a DOT based system. E.g the olive or an O-ring Commented Jan 7 at 10:02

As others have mentioned, keeping it covered when not in use and storing it at a consistent temperature will greatly help keep free from contamination and stable.

One additional thing that you will see in grease is separation of the heavy/waxy components from the more liquid oils in a grease over time, even with care to keep it covered and at a stable temperature. This can occur even in unopened containers as well. This can be seen in grease from a squeeze tube when the initial material ejected from the tube is very runny and sometimes even clear. Discarding this initial material will usually yield a more consistent and expected consistency of the grease you are attempting to use. When I sense that grease has separated a little, I will attempt at mixing the grease to return it to a homogenous (consistent) form. If the grease is in a squeeze tube, I will try to move the grease around the tube as best I can, and if not successful enough, still just discard the initial material that is too runny to provide the protection needed by a thicker and stable grease.

Even with a little separation over time, grease is almost always still useable.


The grease will last for decades if not longer, provided its in a sealed container like a wide-mouth screwtop jar or a screw-mouthed squeezable toothpaste-like tube:

enter image description here enter image description here

The small amount of air trapped inside the container won't noticeably affect the grease over time.

However this kind of cartridge needs to be installed into a grease-gun when it is opened. If you do that it will store as well as the jar and tube. If you leave these cartridges open to air with no airtight seal, they will attract dust and trap potential contaminants like bugs or swarf.

enter image description here

The one thing to do for preserving lubricants is keep them stable. Don't expose to heat cycles, keep them in the shade and out of the weather, and away from children.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.