I'm replacing some 26 x 2.10" mountain bike tires that I have on my bike with some thinner 26 x 1 3/8" road bike tires for commuting, however somehow even though they both say that they are 26" the new road bike tires are too big for the rim!

I can take the new tires back, what should I look for when picking out a new set of tires?

  • 2
    Welcome to the wonderful world of inch tire sizes. Inch tires are not sized by the rim dimension, but the outer diameter, and when you change the width of the tire you change the difference between rim diameter and outer diameter. This covers much of it, but it's pretty confusing at best. Commented May 20, 2012 at 19:35
  • From what the page linked by DanielRHicks tell, these tires are definitely NOT to be used with MTB rims. Commented May 20, 2012 at 20:00
  • Thanks Daniel, I actually did find that page but I guess I didn't read it in enough detail and assumed that 26x1 3/8" would be the same as 26x1.375! Anyway now that I know how to actually read the site, I'll hopefully find something good next time I go in.
    – robbrit
    Commented May 20, 2012 at 20:57

1 Answer 1


You ask what to look for when buying MTB rims.

The most obvious thing would be ask for Mountain Bike tires (slick tires in your case) at the shop. Just using the words "mountain bike" is enough for any shop attendant.

Now if you want to take a tire and, just by looking, tell if it fits your rims, you must look for the ETRTO code, which states the inner diameter of the tire bead in milimeters, which is 559 for MTB.

So you have 47-559 (read right now from one of my tires) to be equivalent of 26x47 (47mm wide, or roughly 1.9)

Hope this helps

  • 1
    559 matters. 47, because it's the width of the tire will vary to get a narrower tire. 559-32 would be something to look for to commute on.
    – zenbike
    Commented May 21, 2012 at 3:10
  • @zenbike: yeah, 32mm is my preferred width for asphalt slicks, too, which would be 26 x 1.25 Commented May 21, 2012 at 3:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.