I have a Shimano 7speed. The shifter goes full range, but when putting it into 7, the derailleur clunks down in a stepwise fashion, especially with increased power applied.
3
-
1On your bike, is 7 the cog with the most teeth, or the least ?– Criggie ♦Commented Oct 20 at 22:23
-
1So you're saying that a single step from 6 to 7 clicks several times before it engages properly?– DavidWCommented Oct 20 at 23:31
-
1If shifting while applying power on pedals then yes it will clung loudly specially if going uphill and going down into a lower gear at the same time . Could you please re- edit your question so it's a bit clearer what the problem is? If it's just noisy please rephrase. Is your shifter index? Most shifter will change one gear at a time, which is the right way to change gears but if you have a friction none index then yeah going up more than one gear at a time would definitely be noisy and hard on the chain.– MindDBikeCommented Oct 21 at 4:37
Add a comment
|