Questions tagged [bb30]
The bb30 tag has no usage guidance.
10
questions
1
vote
1answer
52 views
SRAM S2200 - replacement BB30 spindle?
I'm having a hard time finding a replacement BB30 spindle for a SRAM S-2200 (X.0) crankset (originally fitted to a 2013 Specialized Enduro). I stripped the thread on the spindle, but I would like to ...
2
votes
1answer
46 views
FSA crankset play
The patient is 2019 Cannondale Synapse with FSA crankset, BB30. I have an issue with adjusting the front derailleur. The chain rubs against the derailleur cage but only during the push phase of the ...
5
votes
3answers
245 views
30mm bottom bracket and 30mm spindle axle compatibility, should it go in by force?
I am not sure if this is a stupid question or not. Finding compatible parts is not so easy for MTB, after quite a search I found my bottom bracket shell is not so standard, PF107.
I bought a Rotor ...
1
vote
1answer
1k views
SRAM BB30 cranks - how to remove crankarm from spindle?
I have SRAM S2200 (X.0) cranks with a BB30/PF30 spindle. They are 3-piece ones, with the self-extracting mechanism on the right (drive) side, and a regular non-puller bolt on the left side.
I want to ...
1
vote
1answer
257 views
Adapter for a Shimano 7000 Crankset to BB30 Pressfit
OK. I am confused with all these BB standards. I'd appreciate it if someone points out the correct adapter for my Opus Allegro 4.0 with a bb86.5 monocoque running on a Tiagra 4600 groupset and FSA ...
1
vote
1answer
108 views
Praxis Works M30 crankset to FSA BB30 fitted in a BB386EVO shell
I have a BB386EVO frame shell and a FSA PF BB30 fitted into it. All good with this
Now, I have a Praxis Works M30 crankset that I want to use but I haven't been able to install. The axle seems too ...
2
votes
1answer
456 views
Can a BBright bottom bracket that now houses a 24 mm spindle be changed to 30 mm?
Cervélo bikes use a bottom bracket standard known as BBRight. I recently bought a Cervélo with a Shimano crankset, but I'd like to use a Quarq BB30 crankset.
I read that BB30 was compatible with ...
3
votes
1answer
105 views
can bottom bracket type be determined without disassembly?
Is it possible to determine wether my BB is press fit or threaded w/out disassembly? It's XT 8000 if that helps.
3
votes
1answer
605 views
BB30 to BSA frame conversion with internal cable routing?
I'm interested in using BSA crank parts with a certain BB30 frame and I'm a little unclear about cable routing, I'm hoping somebody here can help clarify the confusion.
I'm considering purchasing a ...
4
votes
2answers
7k views
Bottom bracket replacement advice needed for BBright BB386EVO
I've got a Giant TCX SLR2 (2015) according to the spec sheet it has:-
Crankset: FSA Gossamer Pro Cross, 36/46
Bottom Bracket: FSA MegaExo
The other day I noticed the bottom bracket isn't sounding ...
