Questions tagged [conversion]

How to convert part or all of your bicycle from one type to another. For example, from a derailleur bike to a fixie; from an upright to a recumbent; or from dropbars to straight bars.

Filter by
Sorted by
Tagged with
0
votes
1answer
54 views

70's Peugeot to Fixed Gear Conversion

I have an old 1970's Peugeot frame (originally a 10-speed, I believe) that I have been slowly trying to convert to a fixed gear bike. I am at a complete loss for which wheelset is appropriate. I have ...
14
votes
2answers
3k views

Can a normal bicycle be adapted as a draisine (to use on abandoned railways with the tracks in place)?

For a long time I've wanted to rent a draisine and ride it down an old abandoned railway. There's dozens of places in Scandinavia where one can do so. Source: Jonas Andréasson, Wikimedia Commons ...
1
vote
3answers
68 views

Identification of non-standard frame feature and suitability of frame for mid-drive e-bike conversion

My question comes in two related parts: firstly, what is the piece of folded, drilled metal projecting rearwards from the lower bracket in the photo above? Secondly, does this piece of metal have ...
5
votes
2answers
2k views

Removing rear hub end caps (Mavic Allroad Pro)

I've just bought a Mavic Allroad Pro wheelset and I want to convert the rear hub from 12x142 to 10x135 configuration. I bought the 10x135 adapters (highlighted in red in the attached image, it's a ...
0
votes
2answers
87 views

Convert front wheel back to fixed nut

My quick release rattles so how can I convert back to a fixed nut front axle?
0
votes
3answers
160 views

What features does a mountain bike need to be converted to an ebike?

I'm looking convert a mountain bike and convert it to electric with a rear hub kit. I am wondering what features I should look out for to make this easier: Is there any way to keep the cassette that ...
2
votes
2answers
108 views

Converting an SRAM Apex 2x10 to 1x10

I want to convert my bike to a 1x drivetrain (and move to a dropbar). It's a Commençal Le Route from 2013, full specs are here: mostly a 2x10 SRAM Apex Groupset (34/48 at the front, 11/32 at the rear)....
1
vote
0answers
80 views

DT SWISS 1800C Spline converting from 142-12mm to 135-10mm thru bolt

I'm building up my AWOL 2016 model and bought new wheels and front fork. With the front wheel I have no issue, but the back wheel presents a small problem. The wheels i bought are DT Swiss C 1800 ...
1
vote
1answer
80 views

Convert urban/hybrid with hydraulic disk brakes from flat handlebars to drops [duplicate]

I have a urban style bike that I want to convert from flat bars to drops. Can anyone suggest brake levers that: will be compatible with the BR-M355 calipers that came with the bike will be ...
3
votes
1answer
148 views

Can I use slider dropouts on my track dropouts?

My bike's dropout/fork-end basically look like this: and I wonder if I could use something like this to convert it into a vertical dropout with a hanger and disc caliper mount: I'll only be using ...
1
vote
1answer
2k views

Converting quick release to solid axle

I want to swap out my front wheel (solid axle) with another wheel (quick release axle). Issue is, I DO NOT want to use quick release for various reasons. I have tried janking out the quick release ...
0
votes
0answers
103 views

What are my options - TA to QR conversion

I’ve just bought these wheels on gumtree and didn’t realise they were thru axle as I require quick release for my cx bike (BH RX team cross 2014 https://issuu.com/bhbikesusa/docs/bh_bikes_2014-...
2
votes
1answer
110 views

Rickshaw electric conversion

Is it possible to buy a traditional pedal rickshaw and stick an electric bike conversion kit on it? The rickshaw I've seen is the type when the rider is at the rear and so has two wheels at the front ...
1
vote
4answers
2k views

Will panaracer 27.5x3.5 tires on Velocity Blunt 35 rims fit on a Medium Surly Karate Monkey Frame?

Will panaracer Fat B Nimble 27.5x3.5 tires on Velocity Blunt 35 rims fit on a Medium Surly Karate Monkey Frame? I doubt there will be any clearance issue on the front fork since it can hold a 29x3 ...
1
vote
1answer
2k views

Is it possible to convert a press fit bottom bracket to threaded?

I have a road bike with a press fit bottom bracket (I'm not quite sure which kind). The guides I have watched make it seem fairly risky to replace and requires ~$250 worth of tools to replace. I saw ...
16
votes
7answers
6k views

Mountain Bike on Paved Roads

I'm an occasional biker. I bought a mountain bike (nothing fancy) with the idea that I might use it off-road or on mountain trails (of which there are many here in Calgary). However, since I've bought ...
1
vote
3answers
421 views

Hybrid flat to drop conversion advice [duplicate]

I have a Whyte Portabello hybrid, I wanted to swap to an adventure bike with drops. I thought as an alternative it might be easy to convert my existing bike instead, and save a bit of money. It has ...
5
votes
3answers
1k views

How do I purchase a drop bar bike that will be converted to flat bar?

I really like the Kona Sutra from both a price and specification point of view. As I have only ridden flat bar bicycles I am not sure if I can used to the drop bar. In case I cannot, I would like to ...
2
votes
1answer
131 views

Can I install/convert a Giant Quick-e+ 2019 to use an Alfine 11 speed IGH?

I have a Giant Quick-e+ 2019 and would like to install either a Alfine 11 speed di2 IGH. My first question is, is it compatible? I've been looking at the measurements and it seems all ok. But when I ...
3
votes
1answer
249 views

Convert Sturmey-Archer AW hub to AWC

I have a 1972 Schwinn Breeze with a Sturmey Archer AW 3-speed hub (no coaster brake). I would like to replace the internals of the AW hub with the internals of an AWC hub (which has a coaster brake). ...
0
votes
2answers
132 views

Brifters for Shimano Acera M3000 9 speed

I'm trying to find out if I can swap the handlebar on this bike Trek Lync 3 for a dropbar one. It has 9 speeds and Shimano Acera M3000 rear derailleur. Would any Shimano 9 speed brifter work? (...
3
votes
2answers
807 views

Ultegra R8000 groupset want to convert to flat bar shifter

I have searched but could not find any answers for my question. I have the Ultegra R8000 mechanical rim brake group set on my road bike and I want to convert it to a flat bar setup. I have searched ...
7
votes
1answer
646 views

Converting tandem to cargo bike

I live in South America where we don't have substantial supply of modern two-wheeled cargobikes in the market at reasonable prices, so I think converting a tandem bike by dismounting the stoker seat ...
1
vote
2answers
90 views

Does a singlspeed conversion kit feel different than a freewheel?

I'm trying to get a steel singlespeed and I find it quite hard to find something in the market that is light and with brakes. Will one notice any difference if, for example, one gets a Cinelli ...
0
votes
2answers
114 views

Raleigh Nitro MTB - 5-7 speed freewheel conversion - 135mm spacing

I have a Raleigh Nitro Mountain Bike that I want to convert from a 5 to a 7 speed freewheel. The rear drop-out spacing is 135mm. Am I right in thinking that all I need to do is get a rear wheel that ...
2
votes
3answers
748 views

Is it possible to convert a single speed rear wheel into a multi-speed rear wheel?

If I buy a wheelset that was meant for a single speed bicycle, how could I convert that wheelset to a multi-speed bicycle? Note that I am not asking about converting a fixie ride into a multi speed ...
1
vote
2answers
3k views

Presta or shrader valve for mtb?

Is it better to use presta or shrader valve for tubeless conversion on a mtbike, 29" 2.20 tire, and why?
4
votes
3answers
4k views

Single speed to multi-speed conversion with internal gear hub

I currently have a single speed 52m Crew District. I got it as a commuter once I got moved closer my workplace. I live in a fairly hilly area and I am thoroughly missing the option to downshift and ...
0
votes
1answer
222 views

Tourney drop to flat bar conversion [duplicate]

Is it possible to convert a drop bar road bike with 2x7 Tourney brifters to flat bar using Tourney rapidfire shifters? I believe they only come in 3x7 variant, so is it posible to use that and just ...
3
votes
3answers
1k views

Can a 21 speed Shimano Tourney groupset get converted into a 7-speed?

I currently ride a 3x7 Tourney bike, which I’ve upgraded moderately and it is riding nice. I’d like to know if I can somehow replace my 3-crankset for a simple one, and also get rid off the front ...
1
vote
2answers
383 views

Monster-cross build on the road, will it be fun? [closed]

Don't ask why, don't ask how much but this is what I'm aiming at: 29er entry level MTB with light Al frame stripped down Carbon rigid MTB fork (for clearance) Carbon drop-bar handle bars 35c tires ...
1
vote
1answer
297 views

Convert city bike to road bike [duplicate]

I have a city or normal bike and I want to ask, that with the necessary modification except the frame, is possible to convert this bike in a road bike?
2
votes
1answer
201 views

Question about Shifters

I have a bike with lever/downtube shifters. I hate them, feel like they don't stay in gear for more than 10 minutes at a time, and would prefer a bike that has preset gears. Is there a way to get the ...
1
vote
1answer
2k views

Drop bar to flat bar conversion

Gearing 14-Speed Shimano A070 STI Crankset Prowheel Ounce 42/52T Double Chainring Alloy Crankset Shifters Shimano A070 STI Front Derailleur Shimano Claris Rear ...
4
votes
2answers
316 views

Bottom bracket conversion with rare cups

I'm asking this question as I'm interested in the community opinion in the idea of "am I taking the right path" or "is there a better way". tl;drl; - scroll to the bottom, please. Namely, almost ...
8
votes
4answers
31k views

How do I know if I can replace the 27 inch wheels with 700c wheels on my bike?

I recently purchased an 80's Japanese bike off craigslist called "Jupiter King." It has 27 inch tires but I want to switch to 700c for greater wheel/tire selection. I specifically want some nice ...
1
vote
2answers
2k views

BB height when change 29er wheel to 27.5 wheel

I have a 29er frame Specialized Camber Expert Carbon EVO with 330mm BB height with 120mm 29er fork How much with the BB height be altered if I change to 650b wheels and 27.5 140mm fork? EDIT The ...
0
votes
1answer
70 views

Brand new bike, motor conversion, crank moves when the wheel moves [closed]

I have a brand new bike and I am installing a Skyhawk motor. I installed the rear sprocket using a pineapple hub. I am not sure how this could have tightened anything unless it happened while ...
2
votes
1answer
820 views

Single to double chainset conversion

Can I change a single chain ring to a double? I have an old steel frame with a narrow bottom bracket shell 66mm and a single 50 tooth chain ring. I would like to add a 36/40 inner and want to know ...
4
votes
5answers
8k views

Converting my old mountain bike to a cyclocross

I have a 1992 Bridgestone MB-4 that I am converting to a cyclocross bike. It is a 3 x 7 (21 gears). I am going to put down bars on it and to change the older over shifters and brake levers. As it ...
1
vote
2answers
553 views

Seeking advice: single speed conversion, Fuji ultimate road bike (old!) - Which kit? Which chain? etc

First off - I'm a complete amateur when it comes to doing repairs on bikes. Anything exceeding changing tyres, tubes and perhaps adjusting the brakes is something I've never attempted before. However, ...
1
vote
1answer
504 views

Will mountain bike front derailleur work with Shimano Tourney index shifter?

I am having trouble getting my Shimano Deore DX front derailleur to work with a Shimano Tourney index shifter. I would like to know if anyone else has made this setup work and am interested if anyone ...
1
vote
1answer
590 views

Campagnolo single speed conversion - can I use a 10sp cog?

I have a set of Miche reflex wheels. I would like to use them for a single speed conversion project on a Peugeot frame. can I use a 10sp cog? what I mean is: can I use one of the normal cogs that are ...
1
vote
2answers
1k views

Convert Cannondale Quick5 Hybrid to a road bike?

I have a Cannondale Quick5 Hybrid. I would like to convert this to a full road bike. What changes do I need to do? Is it possible?
2
votes
2answers
757 views

Can I add a gear to my Tourney 14-34T freewheel

tl;dr Is there a way to easily add a smaller chainring to a tourney 7 speed 14-34 freewheel without replacing the hub/wheel Details: I have a 13" Fuji Women's Adventure 3.0. I've been shopping for a ...
2
votes
4answers
1k views

Replacing quick release wheel with ebike - motored wheel

I intend to upgrade my FireFox Sniper V to electric, by replacing the front wheel with a motorised kit wheel. My question is that the wheels (both) are quick-release: is it safe to motorise this bike....
2
votes
1answer
250 views

Adult tandem trike conversion

I'd like to take my old tandem and make it a trike with dally tires and rims on the rear. Has anyone done it. Thanks
2
votes
4answers
2k views

geared to fixied options

I've got a geared bike back tyre that has a dent in the rim. I'm considering a fixed gear conversion. A few points of issue: The bike has small vertical drop outs. The skewer width on the current ...
3
votes
1answer
893 views

Front hub conversion Shimano HB-M756L XT to Thru-axle

Has anybody converted a Shimano HB-M756L XT Front to a 15mm thru axle? The problem is that my bike fork has 15mm holes for thru axle but I have a new/nice set of QR wheels. I need to either convert ...
3
votes
1answer
881 views

Installing downtube shifters with no clamp

I am trying to convert my Schwinn Mountain bike into a road bike. I bought a set of Shimano SL-SY20A 3 (2) x 7 Speed Down-Tube Shifters. they have a clamp attached but my downtube is very wide and the ...