Questions tagged [frames]
Bicycle frame construction, selection, maintenance, and repair.
33 questions from the last 365 days
0
votes
1
answer
107
views
Step Over (high bar) vs Step Into
What's the pro / con list for a step over vs step into bike?
As far as I can tell the step into bikes are just easier to get on without any disadvantages. Please correct me - does this design have ...
- 113
0
votes
0
answers
41
views
Can someone please help to see if FR111 is a real serial number for a 1979 Robinson bmx [duplicate]
I’m trying to figure out if this serial number on a 1979 Robinson is legit it reads FR111 thats it. Can someone please help. Thank you.
3
votes
1
answer
137
views
Steel Frame Broke (Top Tube Just Behind Head Tube)
I have a 1992 Trek 950 Mountain Bike. I've converted it into a cargo bike with racks and baskets; I ride it day or night, rain or shine. I have about 50,000 miles on it. Over the past month or so ...
5
votes
0
answers
112
views
Weird bumps on my Carbon frame fork
I recently noticed some unusual bumps on the fork of my carbon bike. The paint is intact, and there are no visible cracks or signs of damage. However, the bumps seem to follow the pattern of the ...
- 51
6
votes
2
answers
314
views
Abrasion on the seat stay down to the carbon - any impact on frame stability?
Hello you wise people,
I have a road bike frame that has some abrasion, most likely due to the bike rack. No impact. From the touch I can feel that it goes deeper than just surface level. I believe it ...
- 61
2
votes
1
answer
68
views
Rusted steel rivet nut on aluminum frame causing frame to corrode
I have an aluminum-framed hybrid which has rivet nuts set in it for mounting racks and fenders. I am pretty sure these are steel rivet nuts because they seem to be rusting and causing corrosion on the ...
- 495
4
votes
1
answer
180
views
Is there a quantitative method for measuring vibration damping and frame comfort?
Discussions about frame strength or tire rolling resistance can be quantitative: occasionally someone will provide objective evaluations.
But one topic that resists quantifying is comfort. Various ...
- 10.3k
8
votes
4
answers
2k
views
Can I install a screw all the way through these threaded fork crown holes?
I've got a ~2006 Trek 520 and the fork crown area has a threaded hole on both the front and back as pictured. Note that this bike is set up with V-brakes and the hole is not used for a front brake. ...
- 83
3
votes
2
answers
221
views
How to fix a bottom bracket shell that has been cut from outside?
I have a 27.5" MTB which has a damaged bottom bracket shell. When I install the bottom bracket into the shell, it does not stay in the center of the shell. It leans towards the bottom of the ...
- 2,168
0
votes
2
answers
56
views
Bmx bike stamp on dropouts
What kind of BMX bike has an S stamped on the back drop outs? I think it is a Sunday Bike Co. bike, but I can't be for sure.
8
votes
1
answer
2k
views
Accidentally punctured through aluminum frame with a screw tip - still safe? Repairable?
I went to tighten up my rear rack and realized that it was actually a screw not a bolt holding one of the arms on my rear bike to my frame. Apparently I stupidly used a screw that's longer than the ...
- 81
1
vote
2
answers
55
views
My rear dropout notch is 12 mm (roughly 1/2"), am I correct in thinking a 3000 watt rear hub motor axle won't fit?
The bike is a Seattle Micargi stretch
The rear dropout width is roughly 180mm and the rear axle dropout notch was widened to 12-13 mm to accept a thru axle rim with a 12 mm axle. With the notch being ...
- 11
0
votes
0
answers
32
views
Trouble finding frame hanger Daymak to Shimano RD-R3000
Having a really tough time finding the following part:
Frame hanger
3/4inch 1.9mm width screw holes.
Frame # DMK17PR000000004
Derailer # RD-R3000
I've ordered a few, but there is always something ...
9
votes
2
answers
5k
views
What is the purpose of the top tube on bicycles?
What is the purpose of the top tube on bicycles? To neuter guys? My brother crunched his balls so hard on his bike, poor guy.
- 149
3
votes
1
answer
355
views
Scratch or crack in alloy headtube?
I was going over my bike in preparation for the season, and noticed these marks on both sides of the bottom side of head tube, near the weld to the down tube. I can't find any other marks on the bike ...
- 31
3
votes
1
answer
1k
views
Identify year of Kona
I have a Kona Process 134 DL. The serial number is H5AH31229 and I am trying to determine the year. There is also a sticker EN14766. And stamped 4, then under XL, then under T. Can anyone help?
...
- 31
0
votes
0
answers
46
views
Help identifying this Freeagent bike?
so I’m considering the purchase of this bike but all the information about it provided is that it is a Freeagent bike. There are asking $150 and depending on the model/year that may or may not be a ...
3
votes
2
answers
141
views
Help identify early 90s Chro-Moly MTB
I have this Chro-Moly bike I bought in the early 90s in Chile branded as Oxford, but I believe the frame is an import. One mechanic said it is japanese, another that it's italian. The rear part of ...
- 31
0
votes
0
answers
33
views
2012 Cervelo R3 downtube cable stop - replacement part
I need two replacement downtube cable stops for a 2012 Cervelo R3. Does anyone know where I can get them? I found 1 for $50 which is outrageous.
Any advice or leads is appreciated!
Greg
- 1
6
votes
3
answers
2k
views
Is it correct that the bottom bracket shell thread does not go all the way around?
On the inside of the bottom bracket shell, the thread does not go all the way around. At the places where the tubes are welded (or attached) into the bottom bracket shell, there are holes in the ...
- 705
0
votes
0
answers
37
views
Question regarding serial number
Can anyone help me decipher this serial number on my DB? ACS6J02432
I am trying to figure out the exact year and model of this 24" BMX
1
vote
1
answer
105
views
Heavy corrosion of the bottom bracket shell, but rest of the frame is fine
I have a Btwin MyBike cycle, which is now 8 years old. The frame is an steel alloy.
I want to replace the bottom bracket, chrank shafts & chain ring.
The BB was very difficult to remove, used a ...
- 165
5
votes
1
answer
214
views
rear rack > frame compatibility (child seat)
I have a Topeak BabySeat II MTX 2.0 Rear Rack that is supposed to mount into threaded holes in the frame. However, my old road bike does not have these holes, and instead has eyelets welded to the ...
- 51
1
vote
1
answer
313
views
Help me identify the model of this Cannondale frame
I tried everything, saw many catalogues and also tried with the serial numbers but still nothing.
this is the serial code I think. From what I can read I see it's BNRB300131 and the other code is ...
- 21
2
votes
1
answer
635
views
Reynolds double butted 531C top tube rusted, worth repair or not?
Pictures show underneath of top tube. Tube made of 25.4 mm (1 in) Reynolds 531C steel. Rusted through, cleaned a little with file, and most material is still there. Is it worth repairing? Carbon fibre ...
- 23
1
vote
1
answer
70
views
Another question regarding the specific size of stepped ferrules
I have a frame with in total 5 brazed-on cable stop with 5 mm inner diameter, on at the chain stay and 4 at the bottom bracket, and I'm using 4.5 mm outer diameter shifing cable housing. The standard ...
1
vote
0
answers
90
views
Can anyone tell me what frame this is please?
Can anyone tell me what frame I have here? It has RockShox forks and removable rear dropouts.
- 11
0
votes
0
answers
38
views
What Gary fisher model is this? [duplicate]
Repainted so pictures won’t help. Sn looks like T8T-1123 second row C44EMO15. 24 speed aluminum about 16.5 frame with Alivio derailleur. Original color was black with yellow trim.
Thanks for any ...
8
votes
2
answers
157
views
Carbon fiber frame and dropout alignment
I have tried searching for these and failed to find answers.
Is there any tool available for facing a rear dropout to make the two parallel? The dropout alignment tools show that they are not aligned....
- 81
6
votes
1
answer
195
views
How does the frame geometry of a cyclocross bike affect its performance in off-road conditions?
The frame geometry of cyclocross bikes aims to offer a responsive and agile feel while providing stability and control over mixed surfaces. It allows riders to handle the demands of cyclocross racing, ...
- 123
3
votes
1
answer
89
views
Bent Marin team issue steel derailleur hanger. Can I salvage this incredible frame? What's next step?
I found a marin team issue on a local marketplace. The frame is in good shape it seems and I have many m900 parts from the time so I'd love to re-build completely.
The main issue so far is the ...
- 587
-2
votes
1
answer
200
views
Pinarello FP3 30HM12K real or not? [closed]
https://link.marktplaats.nl/m2032857289
Is this Pinarello FP3 real or fake?
Serial number: 30HM12K
Who explain to me. See the comments under please.
- 11
0
votes
1
answer
130
views
