Podcast #128: We chat with Kent C Dodds about why he loves React and discuss what life was like in the dark days before Git. Listen now.

Questions tagged [freewheel]

The freewheel is a ratcheting mechanism, that coupled with a set of gears, is that threaded onto the rear hub of a bike. The freewheel allows the rear wheel to engage and move when the pedals are spun forward, but coast freely when the pedals are stationary or spun backwards.

Filter by
Sorted by
Tagged with
2
votes
2answers
584 views

Shimano freewheel removal

I am having trouble removing the axle/skewer from the below MF-ZO15 shimano freewheel. It is threaded and secured with bolts rather than quick release and the only way I can see to remove it is using ...
3
votes
1answer
501 views

Freewheel in vinegar

I'm renovating an older bike. I took the 6 speed freewheel (Shimano mf-tz20) off because it was rusty, disassembled, chucked the parts in vinegar overnight. The rust came off, but so did the goldish ...
0
votes
1answer
577 views

Campagnolo Zonda Ratchet sound

I bought a Campagnolo Zonda C17 recently and noticed how quiet the ratcheting noise was. My friend owns a pair of Zondas but his one is really loud. why is mine silent? i use a 15 cassette.
16
votes
4answers
10k views

What freewheel mechanism designs are used in bicycles?

What are the various freehub mechanism designs that have been designed and or put into production? (doesn't need to have been made necessarily!) A good post will contain: A description of the design,...
2
votes
2answers
463 views

What wheels can I buy that fit this Shimano UG 5 speed freewheel?

I am refurbishing an old 70s/80s bicycle, I have everything ready but the wheels, what set of wheels should I purchase that will fit this freewheel from Shimano?
1
vote
2answers
191 views

Changing the free wheel

I'm thinking of changing from 8 speed to 9 speed. What are things I should keep in mind before changing free wheel?
1
vote
1answer
602 views

Ebike gear conversion

I have a 29" mountain bike I'm going to put a motor on. I'm going to replace the back wheel with a 26" and my question is about the gears. I need two of them in the same side to freewheel ...
1
vote
2answers
1k views

15T Freewheel Which Works on Flip Flop Hub

I am building a Single Speed Freewheel and I read somewhere that manufactures don't make 15T freewheels that fit on a Flip Flop hub; only 16t and bigger. However, I would like a gain ratio above 3 and ...
0
votes
2answers
3k views

Why are my gears moving but my wheels not turning?

I have two bikes that when I pedal (yes I am pedaling in the correct direction) the gears turn freely, but the wheels don't. One of them I was riding and it felt like it had shifted while I was ...
1
vote
1answer
140 views

Freewheel or sprockets?

I ride a MTB with Shimano components and increasingly when I pedal there is a slippage (no noise or resistance) occurring. Might I Need to replace the freewheel mechanism or is this just the sprocket/...
3
votes
1answer
760 views

Is this an unsuitable cassette lockring tool?

I can't get my lockring tool to fit my cassette's lockring. The tool is about 1mm i diameter bigger than the lockring, although they have "hills and valleys" that line up. Here's the lockring: Here'...
1
vote
2answers
788 views

Can a bmx hub support a 7 speed mountain bike freewheel?

Been wanting to build a new set of wheels for my trail rig. Since my bike uses rim brakes, which work good enough to not upgrade to disc's, I'm going to re-use my old rims. Problem is they are 48 ...
-1
votes
3answers
1k views

Has anyone here ever threaded the left end of a rear hub? (To add a left-side freewheel)

I have found endless opinions on mass-manufactured hubs that are either left-side-threaded or 'reversible' or etc. I am not seeking information or opinions on these. I am also aware of the available ...
-1
votes
1answer
1k views

When I pedal the back wheel doesn't turn [closed]

When I pedal my back wheel of my BMX bike doesn't turn. About a month ago I took my bike to the shop and they said it would be a 200 dollar fix with my tune up. It all started with a while ago, I ...
2
votes
1answer
622 views

What is a good replacement for my MF-Z012 6 speed wind on cassette?

I'm trying to find a good replacement for my MF-Z012 6 speed wind on cassette. Thing is, I've upgraded my bike with '93 Dura-Ace rear and front derailleurs. Trouble is they are 7-speed compatible. ...
3
votes
2answers
286 views

Regina Extra Freewheel or Cassette

I have a road bike (Carlton Flyer, 1977) with a regina extra rear cassette. I'm interested in downgearing it (i live on a massive hill) and am trying to identify whether it is a freewheel or cassette ...
2
votes
2answers
2k views

Cassette jerks chain forward intermittently

I have a 3 year old road bike with Shimano Ultegra 11 speed freehub CX-75 and cassette CS-6800. Recently I started hearing clunking noise from the drivetrain during freewheeling. It appears that the ...
1
vote
1answer
225 views

How to find compatable cassette for older Shimano

I have a 2002 Diamondback Oakpiont. The derailleur says c201. Is it freewheel or cassette? If it's cassette, the last gear seems to be the nut (12 notches). Here is link to the bike on Bikepedia. How ...
1
vote
2answers
83 views

How to unscrew freewheel sprockets with 9 broken spokes

A friend of mine has this problem. I haven't seen the wheel, but I suppose that the broken spokes are in one "area". It's a 27 inch wheel. Is there any tool that can hold hub tight enough to use a ...
2
votes
1answer
484 views

upgrade from MF-TZ21 to 7 Speed cassette freehub

I'm trying to save costs so I want to upgrade to 7 speed 11-28 Cassette to keep the same shifters, dealer says I need a new Freehub, new 7 Speed Cassette, new chain AND NEW DISC BRAKES, why do I need ...
7
votes
1answer
1k views

Is changing wheel necessary to use a freewheel with different number of gears?

Approx. 3 weeks ago I found an abandoned frame (including handlebars, fork, brakes, pedals and shifting gears attached to it). I decided to use it to build a new bicycle since only recently I've ...
0
votes
1answer
43 views

Can a 7 speed torpedo cable index a modern day 7 speed freewheel?

I have an old cable from a 7 speed Torpedo internal hub and am wondering if it will properly index a modern day 7 speed freewheel or if it is way off. Is there an easy way to check this? Just ...
5
votes
7answers
5k views

Reverse Gear in Bicycles

For an ordinary bicycle (neither fixed gear nor capable of changing any gears). Is it possible to modify it to have a reverse gear on it? (i.e. reverse pedaling causes the bicycle to go backward) (...
2
votes
1answer
514 views

Freewheel not engaging when temperature below about -20c/-4f. What is freezing?

Is it moisture/slush in the freewheel that is not evaporating because I have to keep the bike outside all winter? Then it might freeze when the temperature goes low enough. How long would it take to ...
2
votes
4answers
4k views

Tyre rubbing against frame

Bicycle : Fixie, it came with fixed gear and freewheel, I use the freewheel cog. Today, after a tire and tube replacement it now rubs on the frame. The new tire is a little bit bigger but this ...
0
votes
2answers
640 views

29" Ascension mountain bike by Schwinn [duplicate]

My freewheel stopped working. I can still pedal forward, but not backward. What's wrong with it?
-2
votes
2answers
652 views

Using only 7 speeds of an 8 speed freewheel is ok?

I currently have a 7 speed Shimano RD (rear derailleur) that is working perfectly with the stock 7 speed freewheel which is 14-28. Shimano has a MegaRange 7 speed freewheel that is 14-34 but the ...
0
votes
2answers
93 views

freewheel stress and possible difficult removal with super underdrive gear?

I tried to research this online but didn't see any examples of this exact concern, which is if I gear down a very cheap mountain bike that has a 7 speed freewheel, do I run the risk of creating so ...
-4
votes
1answer
216 views

More than 7 speeds on a freewheel? Ok for someone that rides moderately?

I am contemplating going from my 7 speed freewheel to an 8 speed because I want to go from a 14-28 7 speed to a MegaRange 14-34. Problem is my RD will not handle the 34 so if I have to buy a new one ...
2
votes
1answer
90 views

What is this cogset body?

I have some backlash (free movement) in my body of cogset, so I try to dissemble my cogset to discover this weird body: I'm trying to find a new one but I don't know how to call it. Any idea how it ...
1
vote
2answers
304 views

Where can I find a compact/ultra 7 speed freewheel?

Does anyone still make these? I'm aware that I could coldset my frame for a wider spacing, but I'm interested to know if it's still possible to buy a compact freewheel (apart from via e-bay or ...
5
votes
1answer
1k views

Can we turn a fixie bike into a freewheeler?

I'm new to the fixie world. I'm planning to buy a fixie bike though, but to start right away would be difficult especially when I'm pedaling down hill. Is it possible to change the fixie bike into the ...
5
votes
4answers
2k views

Old freewheel removal

I have an old rear wheel - I think its from a Raleigh Arena roadbike from the late 70s or early 80s. There are broken spokes that require the sprockets removed to access. I've done this plenty of ...
3
votes
1answer
149 views

Can you identify this Sachs hub?

I recently picked this up along with a couple of old wheels. I don't know it's age or history. I've only got as far as identifying it as a Sachs. There are no other markings apart from the logo ...
1
vote
1answer
767 views

Is Sram PG850 cassette a substitute for Shimano TZ31 freewheel?

I need your advice. I have a Giant Escape 2014 UK model bike and it's time to change the chain and the original cassette/freewheel, which are worn out. My question is, if I get this Sram PG850 8-...
0
votes
1answer
1k views

How to fix a clanking rear wheel/flywheel

On my single speed--a POS Bikes Direct bike--the rear wheel makes a clunking noise every time I pedal. I think it is coming from the freewheel and it's basically a CLINK! CLONK! noise that is driving ...
1
vote
2answers
4k views

How can I fix my back wheel's wobbling?

On my single speed bike--a POS J Fixie Cafe CF from BikesDirect--has an issue with its back wheel. The wheel wobbles 1cm back and forth when pulled/pushed from side to side. The freewheel has been ...
1
vote
1answer
238 views

Replace freewheel with freehub?

I have a Motobecane Super Mirage that I bought in 1977. I have another bike for regular use, and I've decided to completely rebuild the older one. I determined today that the freewheel teeth are worn ...
2
votes
1answer
569 views

Finding a single speed kit for an old campagnolo from 1997 with screw on freehub

I have an old Campagnolo from 1997 that I want to turn into an single speed. My problem is finding a kit that will fit the freehub. The outer diameter of this freehub including teeth is 34 mm, but ...
3
votes
1answer
1k views

Freewheel sprocket locking up

I was just out riding my bike. Its nothing fancy, just a €300 single-speed with with a flip-flop hub. I usually ride the freewheel side. Today it made some weird noises and decided to lock up / be a ...
1
vote
1answer
577 views

Maillard Freewheel refurbishing

I have a Maillard freewheel, big cog stamped 10 - 84, which i have taken apart, cleaned, lubed, and reassembled following the excellent youtube by RJ the bike guy . i ...
2
votes
1answer
412 views

Can anyone identify this freewheel type?

When googling the types it seemed to most closely match a Atom/Regina but it has 25 24 teeth and is about 3.5cm across. It's from a 1980s Raleigh road bike. But the bike has had a lot of work done to ...
3
votes
3answers
1k views

What causes frames to break at the (rear) dropouts?

The drive-side dropout and rear axle have broken twice. It's an old-style freewheel, not a freehub+cassette. (I weigh around 100kg, and ride a lot, and have been touring on hilly, gravel roads, with ...
2
votes
2answers
1k views

QR vs solid axle for freewheel hub

I've heard a lot of folks complaining about freewheel hubs getting bent axles. I have a rigid BSO with a solid rear axle that I occasionally pound on local trails. I've never gotten a bent axle. ...
0
votes
2answers
358 views

I have a Schwinn Tempo which has a 6 speed freewheel

I'd like to replace my rear wheel because it isn't able to be fixed to be made true once again. The bike is an older Schwinn Tempo, the rear wheelset has a 6 speed freewheel. Or so that's what the guy ...
0
votes
1answer
1k views

Can i fit a 6 speed wheel onto a 5 speed bike?

I have a 5-speed bike with a buckled back wheel. I have found one on the internet cheap, but it is a 6-speed wheel. Will it fit my bike? Will there be any adaptations needed to the bike to use this ...
1
vote
2answers
880 views

Which freewheel remover tool to use on vintage Columbia bike?

I picked up what looks to be a late 80's Columbia 'USA Racing' Women's city bike on Craigslist recently. It needs a new 5 speed freewheel, but I can't seem to figure out which remover tool to use. ...
0
votes
2answers
4k views

Freewheel: 8-speed to replace 6-speed

This is for the Freewheel (Not Cassette Freehub) swapping problem. I would like to know if it is feasible, regarding the axle breakage. Assuming that I have: Good clearance and spacing for freewheel ...
0
votes
2answers
279 views

Axle flex under load normal for freewheel hub?

When using a freewheel'd hub is it normal for the drive side of the axle to flex a little bit? I replaced the kickstand on my bike and the new one sits closer to the rear tire with about 2 mm ...
1
vote
2answers
1k views

Trying to build first fixie?

So this is the first fixie bike I would have owned. I am unsure if I want a freewheel one or not so I won't have to constantly pedal. But I was wondering or seeking help for how I could build one by ...