Questions tagged [hub]

Concerning the parts and mechanism of bike gearing, both internal and external. Multi-speed, single-speed, fixed and freewheel.

Filter by
Sorted by
Tagged with
0
votes
1answer
269 views

Fixed hub threaded

I recently purchased a pre rad Bike, my friend who is a bike guy found it for me and said it was a good buy. Now when I learnt to skid I was fanging thru traffic non stop loving it, until that is the ...
0
votes
1answer
152 views

Freewheel is not making noises [closed]

Freewheel on my bike is not making any clicking sounds like it used to when I bought the bike from the bike shop. I got the bike serviced last month due to brake making screeching noises and the rear ...
0
votes
1answer
632 views

Front wheel doesn’t spin freely

My front wheel doesn’t spin freely. I had the hub tightened and now it has a lot of resistance. I use bolts, not a quick release. There isn’t rust on the fork, the brakes are not rubbing.
0
votes
1answer
929 views

Shimano 9 speed road hub compatible with XT 11 speed cassette

I am looking to upgrade my drivetrain, essentially moving from road (Ultegra and 105) to XT mountain. I'd like to avoid replacing my rear wheel if possible though. I've read conflicting things about ...
0
votes
2answers
68 views

Gears and chains [duplicate]

How do I know if I can put up a 10speed casette on my 2x8 setup (so can hub support it or do I need a new hub?). Also can I put a single speed chain on this setup above? I can't seem to find colored ...
0
votes
1answer
690 views

Replacement parts for Trek 7.3

My bicycle was stripped of parts (both wheels, seat post and saddle) outside my house and I'd like to replace them myself as the shop is looking for a huge sum of money to do it. This isn't the ...
0
votes
1answer
2k views

How to tighten a Fox Thru Axle, Cam Lever/QR Skewer?

The cam lever on my Fox Thru Axle is loose but its unlike the Rockshox axle where you can just tighten it up with a little allen key at the top. (edit from comment below) The quick release lever is a ...
0
votes
1answer
368 views

What is the spacing for trek 1.1?

I'm trying to find new wheels for my trek 1.1, and I can't find the spacing for the hubs. The wheels I'm looking at have a front spacing of 100mm, and a back spacing of 130mm. Will these fit on my ...
0
votes
1answer
4k views

What Changed with Shimano Hyperglide-C?

Shimano's HyperGlide-C (11-speed), are the hubs backwards compatible? Can I put an 8/9/10-speed cassette on a Hyperglide-C hub? Can I put a Hyperglide-C cassette on a Hyperglide hub?
0
votes
1answer
1k views

Can I install an 8 speed sturmey archer hub on a dahon folding bike

Can I install an 8 speed sturmey archer hub on a 6 speed dahon folding bike ?
0
votes
3answers
11k views

Freehub has started slipping, what can I do?

I've just gone through the london winter and both my bikes now have a slipping freehub. Admittedly my mountain bikes' freehub is quite old and probably worn out, but I'm wondering if they are seized ...
0
votes
2answers
310 views

i have an se dirt jumper with 4 sealed bearings in the rear hub, can i convert it from QR to solid axle?

i dont want the quick release for single speed, i want to ditch the skewer for a solid axle to torque it down good for single speed... my LBS mechanic said they couldnt do it but with sealed bearings ...
0
votes
1answer
71 views

Is the Shimano TX-505-8 rear hub compatible with 11-speed cassettes?

After recently changing my bike's entire transmission, I noticed that when on the smallest sprocket, the chain is rubbing against the rear derailleur (right next to where the derailleur is attached to ...
0
votes
1answer
42 views

Thread diameter of hub

I've got a rear hub Shimano 5353 with a freewheel,I want to change the wheel for the one with campganolo hub,I dont know whether my freewheel will suit campganolo hub
0
votes
1answer
65 views

Looking for a 40 (or 48 hole) 126mm rear freewheel hub with cartridge bearings [closed]

I was just told that my wheel is toast. Really -- it's just the rim. I had another broken nipple and, when they opened it up, they said the aluminum oxide rained out of it like a salt shaker. I guess ...
0
votes
1answer
54 views

Back wheel lock up, when got off wheel would move side to side [closed]

I have a 29 inch Iron-Horse/Sunday 24 speed. My back wheel locked up, when I got off the wheel would move side to side. I thought I lost bearings, took my freewheel apart and clean. Doesn't look like ...
0
votes
1answer
476 views

Resistance in rear hub?

I bought a new mid-range hybrid bike (Pinnacle Lithium), and for the first couple of weeks it was an absolute pleasure to ride. Then I went on holiday for two weeks, leaving it in a shed in the heat (...
0
votes
1answer
115 views

Campagnolo Large Flange Pista (track) hubs

I haven't any direct experience with vintage Campagnolo large flange pista/track hubs. Can anyone tell me if there are issues with mounting a 70-80s era 5-6 speed road freewheel and using them just ...
0
votes
1answer
389 views

shimano CS-5600 compatible rear hub and freehub body

What rear hubs and/or freehub bodies are compatible with a Shimano 105 5600 10-speed 12-25T cassette?
0
votes
1answer
1k views

Axle to wheel bore ratio? [closed]

This may be the wrong site but it's the closest one I thought someone would have knowledge of the question... It's not for a bike but rather replacing the wheels on a power wheels... The axle is 7/16"...
0
votes
1answer
334 views

Choosing hubs and rims for training road wheels

I'm going to build a training road wheelset for my touring bike. I wonder what should be criteria for choosing hubs and rims and spokes. I'd prefer cheaper options as long as they are durable and not ...
0
votes
1answer
189 views

Sram T3 cracks when pedaling, but it works, in all three gears.The bike is three years in use

My rear hub SRAM T3 cracks when pedaling, but it works, in all three gears.The bike is three years in use.What shoud be done, and how urgent is the problem? I think it's something with the rear hub ...
0
votes
1answer
4k views

Shimano rear hub body compatibility

My free hub body has cracked and im looking to replace it. I have discovered it uses a 14mm hex key to remove. I cannot find a freehub body for sale that matches m785. Will a "m760-m765" body fit my "...
0
votes
1answer
1k views

How is the quality of carbon wheelset from taiwan?

Recently I read from some websites, it sells taiwanese carbon wheelset, How is the quality of the carbon rim, spokes and hub from those wheelset made in taiwan ? I didn't see any brand name, so it's ...
0
votes
0answers
35 views

Hub ,rear hub,shimano 5353 [duplicate]

I've got rear wheel with shimano 5353 hub and want to change it for a wheel with Campganolo record rear hub. I wanna know if my freewheel will fit Campganolo record azzorro hub, coz it's and old ...
0
votes
0answers
77 views

What's a good hub for ultra bikepacking races?

I've now twice had the body of the rear hub destroyed during bikepacking racing (999 Miglia 2017 and Race Around Denmark 2018). I'm currently using Zipp 303 Disc with 177D hubs from 2016 and it seems ...
0
votes
2answers
1k views

Giant ATX 2 2017 axle size?

I have a Giant ATX 2 27.5 2017 and I broke my rear axle 😭. I sent it to my LBS, a week later they told me their axle fitted the front wheel but the back wheel was a different size. They haven’t got ...
0
votes
0answers
143 views

What do the numbers on my hub mean?

I have a Giant mountain bike front hub from a Giant P-XC2 wheelset with the inscription "12,23-12" on it. What do these numbers mean?
0
votes
0answers
1k views

Rear Hub Axle Appears Bent – Causes and Repair Strategy

I had my rear wheel off of the bike noticed that as I spin the axle it appears to be bent – the freewheel end of axle, for lack of a better way to describe it, orbits the centerline of the axle. ...
0
votes
3answers
2k views

Can't remove lockring

Have been trying to get the lockring removed from my cassette so I can replace it with a spacer kit and one sprocket (singlespeed conversion). I managed to get it loose, although the wrong way - so ...
0
votes
1answer
415 views

Raleigh Twenty forks too narrow to accept 93mm hub

93mm hubs are standard size for the R20s but on this particular bike there isn't enough clearance between the fork ends to get a wheel in (I'm using an original R20 wheel as a replacement so it's ...
0
votes
1answer
101 views

Disc Rotor Alignment Mavic Crosstrail

I have a disc rotor alignment question you maybe can help me with. I have a Canyon Nerve AL+ 8.0 that's been working nice until the front wheel got stuck on the brake. First I thought it was a brake ...
0
votes
2answers
182 views

Trek T-900 Tandem rear hub

I have a Trek T-900 tandem that I bought used. It's probably about 12 or 13 years old. I'm having some rear hub issues with it, but I can't identify what hub it is. Trek's website and other ...
-1
votes
2answers
2k views

How to remove very very tight hub locking nut

Even when I use a Park Tool axle vise in the correct hole, I'm still having a lot of trouble removing either of the locking nuts on the axle. I'm holding the cone wrench in one hand then pushing ...
-1
votes
1answer
308 views

Wobble in rear hub

I have a 97' cannonade f1000 that has had disc brakes installed. The rear hub developed a wobble after only 200 miles. I took it back to the shop that built and installed my set up. I thought they ...
-1
votes
3answers
1k views

Has anyone here ever threaded the left end of a rear hub? (To add a left-side freewheel)

I have found endless opinions on mass-manufactured hubs that are either left-side-threaded or 'reversible' or etc. I am not seeking information or opinions on these. I am also aware of the available ...
-1
votes
1answer
2k views

When I pedal the back wheel doesn't turn [closed]

When I pedal my back wheel of my BMX bike doesn't turn. About a month ago I took my bike to the shop and they said it would be a 200 dollar fix with my tune up. It all started with a while ago, I ...
-1
votes
1answer
54 views

Freewheel for my hub

I've got back wheel with shimano 5353 hub and want to change it for a wheel with Campganolo record hub. I wanna know if my freewheel will fit Campganolo hub, coz it's and old version of freewheels ...
-1
votes
1answer
404 views

Spoke length with NOVATEC GOLD PISTA hubs and H PLUS SON SL42 rims [duplicate]

I have bought the NOVATEC GOLD PISTA hubs (http://novatecusa.net/project/a166sbt-rh/) and the H PLUS SON SL42 rims (http://hplusson.com/products/SL42) with 32 spokes. Someone know how does long I must ...

1
3 4 5 6
7