Questions tagged [rear-wheel]

The aft wheel(s) of a bicycle or tricycle. In most bicycle designs, the rear wheel is the drive wheel but this is not always the case especially with recumbents and tricycles.

Filter by
Sorted by
Tagged with
4
votes
1answer
210 views

How to remove this Mavic spoke cover from the rear wheel?

everybody How do I remove this spline cover from the rear wheel? I'm trying to replace a spoke, but I can't do so because the cover is blocking the way. I've tried using a flathead screwdriver to push ...
1
vote
0answers
37 views

Broke Spokes backwheel e bike [duplicate]

Four spokes on backwheel of Riverside 500 ebike just snapped when I was going uphill. Anyone else had this problem or know why it could have happened?
1
vote
1answer
171 views

Correct spoke tension for DT Swiss EX 471 26" 32h rim paired with Wheelsmith DB 14 spokes

I am currently in the process of building a wheel, and I'm super confused on how to determine the correct spoke tension. I bought the Park Tool TM-1 to correctly gauge the tension. DT Swiss doesn't ...
5
votes
4answers
820 views

Freehub pawl system vs star ratchet system

If you were to choose between a Hope Pro 4 hub and a DT Swiss 350 or 240, purely based on their freehub types, ie Hope's pawl system or DT's ratchet system, which would you choose and why? The main ...
0
votes
2answers
81 views

Looking for advice - cracked rear hub along bearing races - How to buy a new rear wheel?

TL;DR below My bicycle is an old used Trek hybrid (1994?) that I got a few years back. When replacing the tires recently I discovered that my rear axle was significantly bent (not surprising for a ...
1
vote
1answer
69 views

Derailleur does not match up with chain after tube replacement

I have been recently replacing rear inner tube on my bike, since then I was not able to fix the wheel back in. It makes unusual clicking sounds when backpedaling and one side of the chain gets loose....
1
vote
1answer
74 views

Squelching noise from back wheel

My bike is making a weird squelching sound from the back wheel. Any idea what it might be? I made a video of the sound, it's at this link: https://drive.google.com/file/d/1zt_DAa2avX9bhJ4E-...
4
votes
2answers
64 views

Back wheel continuously coming loose

I’m a total amateur when it comes to biking... I recently purchased a new Bergamont Summerville N7 and took it out today for the first time longer than an hour (I’ve had it a week and been to the ...
0
votes
1answer
78 views

Diagnosing and correcting hop on carbon wheel

NOTE - please read update below and all comments. I have a Mavic Cosmic carbon wheel which is perfectly true, but it has some vertical hop (3-4 mm). I thought at first that it was out of round, but ...
1
vote
1answer
106 views

Grinding sound from rear quick release

I heard a grinding noise from the rear wheel on my mountain bike. I took out the quick release and saw that it's full of dust. Before my last long ride, I serviced my rear hub by removing the cassette,...
2
votes
1answer
183 views

How do I figure out what rear axle to purchase for new wheel?

I have a Voodoo Bizango 2016 and recently purchased a new rear wheel for it as I’m a larger rider and kept popping spokes. It’s a Halo vortex 29" wheel with a Shimano HG freehub. I’m trying to ...
7
votes
3answers
1k views

What is the best approach to an again and again wobbling rear wheel

For the last ten years, I have been riding a mountain bike (Specialized/Rockhopper), and often rather wildly, through rough terrain (roots, jumps, ruts). I am around 110 kg (240 pounds). As a ...
3
votes
2answers
144 views

Derailleur and back wheel alignment issues

I've got a very old used bike. It has a bunch of issues I'm trying to fix at once: the derailleur is not keeping the chain tight only in certain gears, the back wheel wobbles slightly and over time ...
2
votes
4answers
334 views

Why are rear wheels dished?

I know it's because of the space taken up by the rear cassette. But why not just make the hub narrower, and not make it asymmetrical? Sure, the drive-side hub flange must be moved inboard to make room ...
2
votes
5answers
338 views

I am always having a broken spoke once in every 500Km

I have a Giant Escape hybrid bike, which I bought as a secondhand bicycle. After I had bought it, once in every 500km, according to Strava records, I am always having a broken spoke in rear wheel. ...
7
votes
3answers
2k views

Broken 26'' wheel

I need your recommendations. I have the issue with my rear rim. It was broken. And now I have a dilemma to buy a new wheel or buy a new rim and use hub, spokes from the previous wheel. One problem the ...
3
votes
1answer
134 views

Back wheel jumping out of rear dropout with child transporter

Some days ago, I was riding my bike towing a child transporter. I was going steep uphill and put quite some force on the pedal. Suddenly, I heard a loud snapping sound and the back wheel was blocked. ...
0
votes
1answer
71 views

Rear wheel moving from side to side [duplicate]

Rear wheel is moving from side to side anyone have any ideas what might be the problem thanks
7
votes
3answers
1k views

Skewer removal without quick release

I am trying to replace my cassette. I can not use my cassette removal tool as it is blocked by the skewer, so I need to remove it. From what I can see, the skewer is held together by two bolts. I have ...
3
votes
1answer
178 views

Can I attach a 40 spoke hub to a 36 spoke rim?

I just discovered a crack in the back rim of my mother's bike and I'd like to replace it. The trouble is that the hub is 40 spoke and I cannot find a 40 hole rim that would fit the bike and would be ...
1
vote
1answer
83 views

DTSwiss rear wheel hub part name

I want to buy a used bike (Specialized Tarmac) with good price But rear wheel hub is broken as in photo What is a part name I have to buy and change, or it must be completely changed PS: I don't know ...
0
votes
1answer
70 views

Am I able to replace the bolt in the hub to be quick release on a back wheel?

I have this wheel and want to replace the skewer that it is tightened with to a quick release fitting is this possible?
2
votes
2answers
319 views

Brompton Rear Brake Caliper Assembly Schematic

What is the list and order of components that thread onto the Brompton's rear brake assembly from the brake caliper through to the Lower Stop Disc for an M6R? At some point on a recent ride down ...
1
vote
1answer
35 views

Hub compatibility for Felt Nine 60 2017

I have Felt MTB Nine 60 2017 and I want to change my rear hub but don't know how to look for compatibility. It says 6 bolt QR x 135.
1
vote
3answers
173 views

Reassembling rear wheel hub

I have a ten year old decathlon cheapo bike and I wanted to take out the axle out of the rear wheel to see if I could replace it with a quick release mechanism and also learn a bit about how it works (...
0
votes
1answer
62 views

Derailler clearance on ERTO 406 wheels

i have a Cannondale Hooligan I on which I plan to remove the Shimano Nexus 3spd IGH and replace it with a derailleur gear system. This bike has ETRTO 406 aka 20 inch wheels. I want to use an 11 speed ...
2
votes
1answer
338 views

How do I choose a replacement wheel rim?

These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes) It's a ...
0
votes
1answer
40 views

What 5 speed freewheels are compatible with a Sun Rims M13II rear wheel rim?

I have a 1972 Schwinn Varsity. I have purchased new wheel rims. Both the front and rear rims are Sun Rims M13II model rims. I need to know what 5 speed freewheel will attach to the M13II rear rim ...
0
votes
2answers
201 views

Rear wheel slipping out of slot after attempting a 180

So whenever I try a 180, I seem to put quite a bit of sideways force on the rear wheel when I land because I never make it the whole way. After the landing, it causes the wheel to come out of its slot....
1
vote
1answer
284 views

Rear rockshox thru axle. How to remove it if skewer got broken off?

Hello, im new here, how can I deal with this issue any suggestions? Thanks in advance.
0
votes
2answers
76 views

Can't find nuts for old mavic wheel

I picked up an old mavic wheel, and I'm having a tough time just finding some nuts for the axles. I went through a bin at my community bike shop and couldnt find anything that fit the threads. The ...
0
votes
1answer
124 views

27“ x 1 1/4” back flip flop wheel or track wheel(rear)

I'm looking for a good wheel, I don't know much about brands and what's reputable. I'm replacing my back wheel because it's a suicide hub set up by a local bike shop(cheap short term fix) I'm ...
2
votes
2answers
386 views

What could be causing excessive friction in a new rear hub?

I recently had my bike (Focus Mares CX) serviced by my LBS, during which they replaced my wheels with a set of new Campagnolo Khamsin wheels. In the month since I had that done I've found it markedly ...
5
votes
2answers
500 views

Back wheel suddenly started “wiggling”

I bought recently a second hand bike for my daily rides, and it seemed in good shape. I rode it for more than a month without any problems, but recently had issues with it and had to get it fixed (...
2
votes
2answers
70 views

New rear wheel to 8-speed Shimano Citybike, don't know what to look for

My current rear wheel wont rotate around the hub anymore, so I need a replacement. I don't know what to look for, but I have this info: Bike is an Avenue Airbase, dont know how old, but more than 3 ...
1
vote
2answers
515 views

Rear wheel wobbles with periodic sound

My road bike currently has a nagging wobble in its rear wheel that I've been unable to determine the source of. I probably would not have noticed this had it not been for an unusual (and annoying) ...
15
votes
3answers
4k views

New wheel. Does it need that little rubber lining between it and the tube?

I recently replaced my rear wheel (hooray for figuring out how to remove the cassette). Now I am about to put the old tube in the new wheel. I noticed the new wheel doesn't have any rubber lining to ...
2
votes
1answer
175 views

I can't extract sealed bearings out of the wheel

I face the problem again of extracting the bearings, this time out of the wheel of my Giant XTC Advanced 29” 1.5 2017, Giant wheel system, hub OEM manufactured by Formula. Once removed caps and ...
2
votes
1answer
282 views

Pinion gearbox + Gates belt drive - what are my options for 36-hole rear hubs?

I currently have a touring bike with 36 spokes front and back, in the front with a SON 28, in the back with a Shimano Deore XT hub. I plan to switch my frame and I'm currently considering switching to ...
0
votes
1answer
89 views

How to keep a component “pressed” so the chain remains hooked?

I am really at a loss of words to describe my problem, so apologies in advance for the poor choice of words in the title. Basically I have this component at the rear wheel (which I think is called ...
4
votes
2answers
531 views

Axle - rear hub and washer thing a bit loose

I have a rear wheel that has needed work 3 or more times in around 3 years (of not very regular riding) and I'm wondering if something is especially wrong with the setup on this FUJI road bike. A few ...
1
vote
2answers
2k views

My back tire rubbing frame

My back tire is rubbing on the frame and is having a great impact on the speed of my cycle.
5
votes
2answers
169 views

Failure in venerable spoke at nipple: causes?

I have a venerable (high spike count) rear wheel that has survived many a year before and after I purchased the bicycle. Today a drive side spoke failed at the nipple while climbing. The road ...
9
votes
2answers
1k views

Chain stuck between cassette and spokes and damaged rear hub - any way to fix it?

My rear derailleur didn't have limit screws properly adjusted so when I shifted to the biggest chainring the chain jumped in between the cassette and spokes. I managed to get it out but then noticed ...
1
vote
2answers
202 views

Rear wheel power spoke pattern

This is my first time posting here. I have been biking for a few years now and learning little by little how to repair my ride myself. My latest problem is 4 spokes of my rear wheel (36 spokes) ...
0
votes
2answers
294 views

Rear wheel is not locking when I am braking

So when I put my rear brake on my wheel doesn’t fully stop (skid) and I can keep on pedalling when I have got it full on. And then the same happens with my front brake, I can have both of them ...
2
votes
2answers
121 views

How do I fix my rear axle?

Bike was working fine. I was stopped at a stop sign, when I went to pedal it jerked and felt like my chain popped off, but it had not. Pedaling does nothing. The back wheel still rolls if I push it. ...
0
votes
1answer
140 views

Wheel keeps going out of alignment and loosening the chain

I have an electric bike with internal hub gears on the rear wheel, so no derailleur. This means that for the chain to stay tight, the wheel axle needs to be dragged back into its seating before it is ...
1
vote
3answers
268 views

What is the maximum weight could 26 1 3/8 tire and tube could withstand?

I bought my first bike few months ago, and it is old Raleigh 26" 1 -3/8 size. Every time I go with this bike through some bumps the rear tire and inner tube get punctured with large hole. It is ...
5
votes
3answers
2k views

Rear wheel not straight because of worn out dropout?

I noticed that my rear wheel wasn't straight and even after realignment it wouldn't stay straight. After some investigation I noticed that my rear dropout appears to be worn out: Is this the problem? ...