Questions tagged [replacement]
Replacing parts, compatibility with existing or new equipment, finding suitable substitutes for old OEM parts, and so forth.
22
questions
2
votes
1
answer
2k
views
How do I choose a replacement wheel rim?
These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes)
It's a ...
- 31
6
votes
3
answers
2k
views
Reinforced Shimano pin snapped before connecting chain - how to resolve?
My previous chain snapped weeks ago and only got a new one sorted.
I've cut the chain to the right size, fed it through the derailleurs and onto the bike correctly.
The last step was to use the ...
- 185
3
votes
1
answer
5k
views
Suitable Shimano integrated shifter/brake replacement for old STX
I am looking for a replacement of an old Shimano STX right shifter, from a Raleigh MT-200 (I am pretty sure this is accurate).
It is an integrated shifter, 7 gears, cantilever brakes.
Other than ...
2
votes
1
answer
3k
views
My Shimano Tourney RD-TY22 7–21 speed bike rear derailleur mech, direct attach has broken, need a replacement, preferably newer
To cut a long story short, I have a full suspension mountain bike. Its rear derailleur mech (see title) is broken, had a trip round the spokes and age has degraded the main springs. I therefore need ...
- 21
1
vote
1
answer
2k
views
Shimano integrated shifter/brake: Cantilever compatible with V-Brake?
I have to replace an integrated shifter/brake, right side, 7 speed Shimano STX.
Is a shifter for V-brake (e.g., this) compatible?
Bobotech recommends here not to do such replacement.
This question ...
0
votes
2
answers
611
views
Replacing a Tiagra FD-4503 front derailleur
Note: Wrong parts were listed originally as Alivio FD-M4000-DS6. Apologies. The broken derailleur was not replaced with the crankset a few years back.
I haven't found great information on how to ...
- 101
28
votes
8
answers
122k
views
When should you replace tires after getting a flat?
A nail punctured my rear wheel tire today while riding.
My question is, how do you know if you need to replace a tire or simply repair it with a tube repair kit?
The hole looks pretty nasty. The cap ...
- 381
7
votes
3
answers
12k
views
Derailleur Pulley Wheel Compatibility
I can't find replacement pulley wheels for my derailer that are explicitly made for it. Should I be safe replacing them with a set with the same number of teeth (i.e., the same diameter) and targeted ...
- 525
6
votes
1
answer
17k
views
Replace a 52/36 crankset with 50/34
I'm looking at purchasing a new bike with a 52/36 crankset on a 11-32 cassette. I've grown accustomed to a 50/34 crankset on the same cassete, and for the type of riding I do in the PNW (300-400ft ...
- 245
5
votes
1
answer
4k
views
Shimano hydraulic disc brake lever and caliper compatibility
My bike has Shimano BR M775 brake calipers and BL M775 brake levers.
The right lever for the rear brake has a broken screw in the reservoir, so it needs replacement.
As BL M775 is no longer available ...
- 587
5
votes
1
answer
15k
views
Putting wider wheels on a hybrid bike
I've recently had a bike donated to me by a friend so I can start commuting to work. It's a hybrid style bike, and uses 700x32C tyres. My ride to work is along a pretty bumpy, muddy canal path and my ...
- 153
5
votes
1
answer
13k
views
Upgrade/Replacement options for Cannondale Headshok DD50?
I have an older Cannondale that I love.
It's an F600 comp (the special edition one in pumpkin orange), with a DD50 front shock.
The problem is that the DD50 is WORN as all heck. Even when locked ...
- 51
5
votes
2
answers
6k
views
Using only the brake lever, separated from an integrated shifter/brake
I have an old Shimano STX integrated shifter/brake. The shifter part is broken.
Can I separate the shifter part, with reasonable effort, so I use only the brake and get a new shifter?
From what I ...
4
votes
3
answers
17k
views
Threading Shimano chain, over or under lug?
I have an MTB with Shimano Deore/SLX components.
I just replaced the chain.
Should the chain go over the lug as I have it in the picture?
- 145
3
votes
2
answers
3k
views
I need to replace a cassette for CS-HG500-10 but want to go XT
My bike has a CS-HG500-10 cassette which has reached its EOL after 7400 km (I didn't think that changing the chain, unless absolutely necessary, was something good). It's the 11-34 version, I-...
- 177
2
votes
3
answers
4k
views
Can I replace a GXP press fit bottom bracket with a Hollowtech?
I've recently acquired a frame for a project and have an Ultegra crank set from my crash bike I want to use on it.
The frame currently has a GXP 24mm press fit BB and I've got a spare Hollowtech BB,...
- 21
2
votes
2
answers
2k
views
Replace 27.5 x 3" MTB tires with 27.5 x 2.1"
Recently I bought a new MTB, a Frog Xtream Vantage.
After two days of riding I realized a 3" tire size is too heavy and slow to ride. So I thought to replace the 3" tires with 2.1" regular MTB tires....
- 123
2
votes
3
answers
7k
views
120 mm fork with a frame designed for 100 mm fork?
I have a Cube Reaction Team 2011. It came with a Fox Alps 32 fork, 100 mm travel (26"). The fork is now ruined and I need a replacement (on a rather tight budget) and I found a good price for a ...
- 266
2
votes
1
answer
4k
views
How to remove and find a compatible chainring for my FSA Comet 1x10
I currently have a 30 tooth chainring on my Devinci Kobain. The gearing is a little too tough for my current fitness level. I am considering putting a smaller chainring on it (as per this question).
...
- 8,406
1
vote
3
answers
861
views
I just replaced my cassette, do I need replace the 2 month old chain?
I replaced both my cassette and chain in July (2.5 months ago).
For some reason my chain started skipping when I was in the smallest cog in back. I took it to a shop, they could not find anything ...
- 13
1
vote
2
answers
1k
views
Does "speed" of a replacement chainring matter?
I'm looking to replace one of my three chainrings, and I'm having a hard time finding something that matches my bcd/bolt-pattern/tooth-count. I have found a few options, but they say they are for 10- ...
0
votes
1
answer
2k
views
SRAM Rival brake caliper screws/bolts are rusty, how to replace?
I have a full SRAM Rival groupset from 2011. Having used it in humid and rainy places for a while, most of the parts are OK, but the small button-head screws (or bolts?) in the QR pivot for the brake ...
- 2,308