Questions tagged [sram]

Questions that specifically deal with SRAM components. (No need to use if SRAM is an incidental part of the question.)

Filter by
Sorted by
Tagged with
2
votes
1answer
39 views

Sram trigger shifters for flat bars

I have a Kona Rove ST (specifications here). I'd like to change the drop bars by flat bars (it will be better for the travelling I'm planning, but that's not the point). But I don't know what ...
2
votes
2answers
74 views

Changing to a smaller gear ratio

I have a Kona Rove ST, with a 40 teeth gear wheel and a 11-42 cassette. It's all SRAM. Here is the technical description. It's ok for now, but I'm often using the smallest ratio (40x42) so I don't ...
1
vote
1answer
69 views

How to disassemble SRAM PG-950 cassette

It seems to me that SRAM used not rivet to hold all the cogs in one place, but long screw. This screw looks like a hex one, but I tried hex keys I have and I didn't find a match. Unfortunately the ...
0
votes
1answer
36 views

Is SRAM road 11-speed 11-42 cassette compatible with Shimano MTB 11 speed?

I know that SRAM has adopted Shimano specs for chains and cassettes so they should be interchangeable but before I buy, I'd like to confirm. Are these cassettes interchangeable: SRAM PG-1130 11-42 - ...
1
vote
1answer
38 views

RockShox Recon Gold fork problem

I have a RockShox Recon Gold (100mm travel) fork, 2017 year of production. I have made 150 hours service. Followed the instructions carefully, disassembled it, have cleaned everything, changed seals ...
0
votes
0answers
82 views

SRAM XD cassette will not fit on the splines of an XDR driver

I have an 11 speed 10-42 XD cassette that I am trying to fit on an XDR driver (this one - https://www.alltricks.com/F-41493-pieces-roues/P-676097-fulcrum_body_sram_xdr). No matter how I turn the ...
2
votes
1answer
65 views

The shifter dosen't want to shift to the lower gear

This is a new shifter and derailleur but only can shift to the highest gear and won't shift back to the lower gear. How can I fix this? I already changed the cable housing but when I pull the ...
0
votes
1answer
54 views

My Sram x-3 rear derailleur will only shift to the highest gear but won't shift back lower

The rear shifter is new and the shifters work smoothly but only can shift to the bigger sprocket and no matter what I do the shifter doesn't shift back to the smaller sprocket . I don't know if this ...
0
votes
1answer
114 views

SRAM GXP crank installation and rear hub preload

I just had some new BB bearings installed and am going to put the crank in but have two spacers/dust shields I am uncertain of position. I had everything laid out how it was removed but it got mixed ...
1
vote
1answer
143 views

SRAM AXS double to single

I'm looking at a road bike with SRAM Force AXS 2x crank but would like it as 1x. I see from photos that the spider is separate from the right crank. Are the 1x vs 2x arms and/or spiders different? ...
2
votes
1answer
437 views

How to remove a stuck SRAM AXS (Dub) crankset

I wanted to remove my relatively new SRAM RED eTap AXS crankset from my bike and I'm having problems trying to loosen (meaning: being unable to) the main 8mm hex bolt on the drive side, the step shown ...
0
votes
1answer
107 views

Tune mechanical disk brakes TRP Spyre C

On my bike I have SRAM Rival levers paired to TRP Spyre C mechanical disc brake calipers. I'd like to tune them to "brake harder"; currently, I have to press more than half of the way on order to ...
3
votes
1answer
344 views

Converting to 1x11 SRAM drivetrain with 8/9/10-speed HG Freehub

I currently have a 3x9 Shimano drivetrain, and I'd like to replace the current Shimano 9-speed rear derailleur/shifter/cassette and front derailleur/3 chainrings with the SRAM PG-1170 11-32T cassette, ...
2
votes
2answers
235 views

Sram Red AXS Crank Bolt Cap missing - how to remove crank, if at all?

I've got an Sram AXS Dub Crankset on my bike and noticed a few days ago, that the black cover around the crankset bolt (chainring side.. where you tighten/loosen usally to remove the crankset) has ...
1
vote
0answers
203 views

Sram Guide R brakes getting spongy

Long time Shimano brakes user, I've recently (few months ago) got a new MTB with Sram Guide R brakes. At the beginning those felt great - not as "biting" as Shimano SLX / XT I'm used to, but feeling ...
2
votes
2answers
285 views

SRAM Twist Shifter Paired with Shimano Rear Derailleur

I'm planning to buy an 11 speed twist/grip shifter from SRAM (because they're the only one who offer 11 speed twist/grip shifter) for my vintage Japanese ladies bike but I'm quite confuse if it will ...
0
votes
2answers
124 views

Why doesn't my new SRAM XG-1295 cassette bolt turn freely?

I am trying to install a brand new SRAM XG-1295 cassette. I watched many videos and it seems very straight forward. Place the cassette on the freehub, match the splines in back, tighten with a ...
0
votes
0answers
41 views

Does anyone here have measurements of SRAM's direct-mount spline interface?

The makerspace I work in purchased a new metal milling unit and I want to test its software's tolerances and mill a narrow-wide chainring. I'm guessing it just consists of a circle with square ...
1
vote
3answers
128 views

SRAM Cassette with Shimano 105 groupset

Can I replace my existing Shimano 12-25 10-speed cassette with a SRAM 11-32 10 speed cassette with no other modifications?
2
votes
2answers
97 views

Not able to get crank bolt into bottom bracket spindle

I recently posted a question about changing my chainset, I was advised on this SRAM chainset which I could use which would fit my square tapered bottom bracket. I have attempted to fit the new ...
3
votes
0answers
76 views

SRAM i3 coaster brake only activating after multiple turns backwards

My son's bike has a SRAM i3 internal gear + coaster brake hub. It has recently started sometimes only activating the coaster brake after backpedalling a good one or two full revolutions. When in this ...
1
vote
1answer
184 views

SRAM Apex 1 doesn't upshift

I have a Boardman CXR 8.9, everything stock except for new mech hanger. It has a 11-42 cassette with a 11 speed 1x drivetrain. It's Sram Apex throughout, no mixing and matching like in other questions....
0
votes
2answers
119 views

Loud “thunk” sound each time my shoes pass the 1 o'clock position with both shoes

Folks, I need a hand. Does anyone know of a bike mechanic that can diagnose problems via FaceTime or another audio/video app? I ride strictly indoors (I’m in Iraq) and there’s a knocking coming from ...
1
vote
0answers
46 views

Pie plate cog on SRAM 2x

Okay guys, I'm trying to re-find fitness in my mid-40s. My bike has a SRAM Apex (don't laugh, if it's good enough for Alberto Contador, it's good enough for me - and you!) 10-speed drivetrain with ...
2
votes
1answer
239 views

SRAM eTAP cassette compatibility

I'm having trouble understanding SRAM road component compatibility "map" as they call it, specifically the cassette and rear derailleur part. For example, the PG-1130 cassette has no black box marker ...
3
votes
1answer
226 views

How to bleed rear SRAM Force 1 brake

I'm having a hard time bleeding the rear brake of my Specialized Diverge. Following closely the instructions provided by SRAM (and other sources like GCN and other people from YouTube) only works for ...
2
votes
0answers
224 views

SRAM eTap rear derailleur chain drop issue

I’m having an issue with my chain falling off the lower pulley wheel when (1) I hit a significant bump or (2) shift from large ring to small ring. But only in cogs 6, 7, 8. Any suggestions? I’ve ...
7
votes
1answer
4k views

Eagle chain B-gap adjustment without plastic tool

SRAM makes this plastic tool for adjusting the B-gap on their Eagle derailleurs. My question is, if I want to measure this distance without this tool (say with a caliper instead), how should I go ...
6
votes
1answer
324 views

Flat mount brake caliper and rotor tolerances

So I was finishing my build today putting all pieces together on my Diverge 52 carbon frame when something come to my attention: the flat mount SRAM Red hydraulic brake calipers can barely clear the ...
0
votes
1answer
205 views

Replacing FSA Omega BB30 with SRAM Force 22 BB30

following my recent post about the problem with FSA Omega BB30, I was advised to throw it away and go for a new one. I've done some research and decided to upgrade with SRAM Force 22 BB30, already ...
0
votes
2answers
614 views

Installing SRAM X3 7-speed shifter with Acera derailleur : shifting stops at 4th cog

I've never installed one of these trigger shifters. Here's what I'm doing: Acera derailleur has chain on the smallest cog. Mount trigger shifter on handlebar with its gear set to 7. Run cable to and ...
0
votes
5answers
1k views

Issue shifting from largest cog to second largest

Got a Canyon Spectral 3 weeks ago, have done around 2 hours riding on it and have noticed an issue with shifting from the largest cog to second largest. The drivetrain is SRAM NX 1x12. There are two ...
0
votes
1answer
895 views

Converting Sram Force 1 to Sram Force 22

I am buying a Sram Force 1 groupset with a new bike and I cannot test it before buying. In the case I really dislike the gearing steps issues, how difficult/costly would it be to convert to Sram Force ...
0
votes
1answer
755 views

Can you use SRAM 11-spd trigger shifters such as NX and GX with Shimano 11-spd derailleurs such as SLX and XT?

I have read some threads that say these work well together and solve the hard shifting issue with the Shimano shifters.
2
votes
2answers
213 views

Rotating 12-speed SRAM GX chain

I have a new mountain bike with an SRAM GX 12-speed drivetrain. I am thinking about rotating the chain to make maintenance easier and to increase the lifetime of the cassette. I would swap between two ...
5
votes
2answers
2k views

What does this barrel adjuster do on the rear derailleur (SRAM Apex 1)?

On this SRAM Apex 1 derailleur, what does this barrel adjuster do? What happens if I turn it clockwise/anti-clockwise?
1
vote
1answer
334 views

Is an SLX M7000 crankset compatible with the rest of my drivetrain?

I ride a Comencal Meta HT AM Origin. Unfortunately I need to buy a new crankset. I’ve been thinking about Shimano SLX FC-M7000 34-24T with a new bottom bracket, BB-MT800. Do you know if that ...
3
votes
1answer
478 views

Imperfect shifting

Have a bicycle with sram rival shifter and sram gx mech which I recently changed handlebars on with new gear cable. There is supposedly a 1to1 ratio here however the shifting performance is not great. ...
3
votes
1answer
195 views

What are these connectors?

And how can I connect to them with my own stylish red hoses?
4
votes
1answer
385 views

Carbon fiber crank arm with scratches--how much damage is a concern?

I have a compact SRAM red crankset with carbon fiber crank arms. On the left side, the outside coating on the end has chipped off from sometimes colliding with the ground while turning. At what ...
5
votes
1answer
193 views

Can I reuse Jagwire hydraulic brake hose?

They were previously filled with Shimano mineral oil. Now they are to be re-purposed for dot 5.1 oil. Any issues with doing so? Cheers.
0
votes
2answers
578 views

Sram crankset compatibility

I have a bike with SRAM s350 172.5mm 40T chainset, SRAM GXP 68mm BB and 12x142mm through axle rear hub, which should make my chainline 49mm. As I have knee issues I am looking for 165mm crank arms (...
2
votes
1answer
130 views

Switching from MTB to road handlebars

I have a gravel bike with an MTB setup. SRAM GX rear mech, SRAM XO shifter, 1x11 system, Shimano disc brakes. How would I go about replacing my flat handlebars with road bars? Alternative 1 Get a ...
3
votes
2answers
838 views

installing 11-40T Sunrace cassette with Sram Rival 22

I'm trying to build up a hillclimb bike (Mt. Washington) - current set-up is OK, but I could use the help AND don't care about temporarily losing the use of my big chain ring. Current set-up (all ...
2
votes
1answer
160 views

Mating Brifters and MTB drive train and disc brakes - Marriage or Divorce

Looking to buy a Salsa-Cutthroat equipped with SRAM Rival brifters; a 1X drive train (11-42t rear cassette RAM Rival long cage deraileur); SRAM GX 1000 crankset; and SRAM Rival Hydraulic Disc Brakes. ...
2
votes
0answers
304 views

Why do SRAM rear derailleur not have a parallel movement

My SRAM rear derailleur (Rival 22 circa 2016) has a non parallel movement. When it is in the lowest gear, the cage and pulley sprockets align with the cassette sprockets, but when it's in the highest ...
4
votes
1answer
321 views

Steps to remove Ultegra and install SRAM Force disc brakes with internally routed hose

I have a CAAD12 disc with Ultegra, but I prefer SRAM, so I have got some nice new Force levers & calipers that I need to fit. This is my first experience with disc brakes. The front setup isn't a ...
2
votes
2answers
177 views

Will Sram GX Eagle grip shift trigger work with 11sp cassette?

Will Sram GX Eagle grip shift trigger work with 11sp cassette? Is it possible to adjust it so that one click in shifter is just useless. I am upgrading my transsmision. I can't afford buying whole ...
2
votes
1answer
275 views

Will the same lock ring fit 11T or 12T ring, SRAM cassette?

I am currently running Sram PG1070 12-28, but would like to upgrade to 11-28. I can get 11T cog for pretty cheap, but I saw I might also have to get a different lock ring then. Is that true, or could ...
0
votes
2answers
76 views

9 speed SRAM shifter for dropbars?

Does anyone know if SRAM makes a 9 speed compatible shifter for dropbars? What's the best option for shifter/derailleurs for a 2x9 cross bike?