I bought a BMX style bottom bracket called a "Spanish" bottom bracket for a dirt jumper.

Instead of using a hammer and a block of wood, I would like to do it correctly with a press... however, I'm not sure what specs I should be looking for in the press?

How do I buy the right press for the job?

I know asking for specific products is against the rules, so if you could just explain the specs for what I should Google to find the right press.

[This is my bottom bracket][1]... it is 19mm inner diameter and 73mm width
[![enter image description here][2]][2]




[This is my frame][3]

[![enter image description here][4]][4]
  [1]: http://www.jensonusa.com/Profile-Racing-19mm-Bottom-Bracket-Gold?pt_source=googleads&pt_medium=cpc&pt_campaign=shopping_us&pt_keyword=&gclid=EAIaIQobChMItaXS_NDO2wIVi1cNCh0xeQhTEAQYAyABEgK7zPD_BwE
  [2]: https://i.sstatic.net/MGp7Y.jpg
  [3]: https://www.deitycomponents.com/store/p55/DEITY_CRYPTKEEPER_FRAME.html
  [4]: https://i.sstatic.net/QKQY3.jpg