Search Results

As long as you use a Shimano brake caliper designed for a road STI lever, which is any Tiagra, 105, Ultegra, or Dura-Ace, they will work not just well, but perfectly. …

This is the 9 speed compatibility chart from Shimano. This is the 6/7/8 speed compatibility chart from Shimano. As you can see, there are no cranks listed as duplicated on both charts. …

Shimano Dura Ace wheels do not require the extra spacer behind the cassette that every other wheel requires. So, no the 7900 wheel should not require a spacer with the 7800 cassette. …

Assuming that your frame has the mounts for v-brakes, there is no reason why the rim should prevent you from using them. There are a number of bicycle types which use standard road rims which are de …

All Shimano components have a series number (not serial number) embossed or engraved in the component. …

Quick answer: You would need to use a PC, and you would need to make sure that the wheels had reasonably close original chain line positions for this to be possible. If not, then no, you can't do th …

To directly answer your question, yes, 9 speed Ultegra is fully compatible with 9 speed Sora. Since even Sora is shifting to 10 speed, though, it might be time to consider upgrading the entire group …

Shimano does make a specific freehub grease, and that is what I'd use, even if I had to order it. Slick Honey, SRAM Hub Butter, or a similar thin, lightweight grease will work in a pinch. …

I have no hands on experience with the microshift shifters, but the SHIMANO Tiagra 4703 flat bar triple shifters, or the R770/780 sets are what you need. …

Or any 7 or 8 speed Mega Range rear derailleur from Shimano. This issue can also be an adjustment of the B tension screw on your existing derailleur. …

You need a crank puller. It threads in to the crank arm, and presses on the bottom bracket spindle to pull the arms off. http://www.parktool.com/product/crank-puller-for-square-taper-cranks-ccp-2 …

According to the service instructions for the Shimano FC-5703, this crank is a 50D/39D/30T tooth pattern. The 2 upper rings are "double" with only the 30t identified as a triple ring. …

Any Shimano rear derailleur designed for 7 speed (3 front x 7 rear gears = 21 speed) drivetrains and mountain bike gearing will work. … For your practical purposes, the compatibility chart from Shimano below gives part numbers for the available rear derailleurs which will work with a 7 speed MTB drivetrain: Those part numbers can be …

With the bike linked, I don't think this hub can be fitted properly. It requires a method to adjust the chain tension, and this frame has neither the eccentric bottom bracket recommended, nor a hori …

Short answer: No they are not. Each model, and usually each year requires a specific face plate.