Skip to main content
10 votes

Disassembling crank on a 2006 Trek Pilot 2.1

I had this exact issue come up at work today, with the same crank. It was quite frustrating! Unlike the OP, I tried progressively harder hammer smacks early on. And also unlike the OP, I was unable ...
Nathan Knutson's user avatar
7 votes
Accepted

Disassembling crank on a 2006 Trek Pilot 2.1

I was able to get the bushing off with some gentle tapping from a screwdriver and a hammer. The bushing is a soft metal, my screwdriver definitely made a mess of the metal. If someone in the future ...
antiduh's user avatar
  • 211
3 votes

Does Bontrager DuoTrap S work with Garmin Fenix 6?

According to this site DuoTrap S supports Garmin Fenix 6: However DuoTrap S will measure only speed and cadence (no wattage). Update May 16 2022: I have acquired one. After fiddling a bit with the ...
Branislav Abadjimarinov's user avatar
3 votes

Disassembling crank on a 2006 Trek Pilot 2.1

I would try reinstalling the drive side and non drive side cups to the frame (to keep the spindle centered). Then I would recommend a game of whack-a-mole on the spindle with a rubber mallet. I have ...
Deleted User's user avatar
  • 9,978
2 votes
Accepted

Does Bontrager DuoTrap S work with Garmin Fenix 6?

For readers who don't know: Trek has dedicated conformal mount points on many of their bikes for their proprietary DuoTrap speed and cadence sensor. In the absence of this, you would have to ziptie a ...
Weiwen Ng's user avatar
  • 32.3k
1 vote

Which Blendr Duo Base is compatible with the stem of the 2023 Trek Roscoe 8

After chatting with the Trek site chatbot it seems the Legacy Blendr mount is the one compatible with the Roscoe 8 2023 stem https://www.trekbikes.com/us/en_US/equipment/cycling-components/blendr-...
Branislav Abadjimarinov's user avatar
1 vote

Disassembling crank on a 2006 Trek Pilot 2.1

From what can tell from the photos it looks like the inner race is seized to the crank axle. When you removed the non drive side bearing did the ball bearings fall out? You can try to carefully cut ...
mikes's user avatar
  • 18.7k

Only top scored, non community-wiki answers of a minimum length are eligible